说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 纤维复合陶瓷
1)  fiber composite ceramics
纤维复合陶瓷
1.
The phase structure of 0 64BaTi 4O 9 0 36BaEu 2Ti 4O 12 /BaTi 4O 9 fiber composite ceramics was investigated by XRD, XPS and TEM in this paper The results show that with the adding of BaTi 4O 9 fibers, the content of O element on the surface of sample increases and that of Ti 3+ and Ti 2+ decreases, the dielectric properties of the new materials are improve
36 Ba Eu2 Ti4O1 2 / Ba Ti4O9纤维复合陶瓷新材料的相结构进行了研究。
2)  Ceramic/fiber compound target
陶瓷/纤维复合板
3)  fiber/NiFe2O4 composite ceramic
纤维/NiFe2O4复合陶瓷
1.
Two-step sintering process was adopted to prepare fiber/NiFe2O4 composite ceramic inert anodes with copper-coated carbon fiber by solid-state reaction.
以高温固相合成法,采用两步烧结法制备镀铜碳纤维增强的纤维/NiFe2O4复合陶瓷惰性阳极,即先以NiO、Fe2O3、微量V2O5和MnO2为原料制备NiFe2O4尖晶石基体材料,然后以该NiFe2O4尖晶石基体材料和镀铜碳纤维为原料,采用冷压烧结法制备纤维/NiFe2O4复合陶瓷惰性阳极。
4)  compound ceramic fiber coating
复合陶瓷纤维保温涂料
1.
Aimed at the high temperature at furnace roof and wall, great lost of body heat radiation, poor leading heating ability and long soaking time, the compound ceramic fiber coating is used to hold temperature of furnace roof and wall, make the heating loss dropped, shorten soaking time, improve heating ability and reduce evergy consumption.
针对环形炉炉顶炉墙表面温度高、炉体散热损失大、导致加热能力低、待温时间偏长的问题,选用了复合陶瓷纤维保温涂料,使炉体散热损失减少,待温时间缩短,加热能力提高,且能耗降低。
5)  fiber/ceramic composite plate
纤维/陶瓷复合材料板
6)  fiber reinforced ceramic composite
纤维增强陶瓷复合材料
1.
It can consider interface layer and interface phase effects on mechanical properties of fiber reinforced ceramic composites.
据此对纤维增强陶瓷复合材料完成了I型加载条件下的应力分析,它有以下特点:①引进界面层,各项分析所得结果均含有界面层材料性能及几何参量等信息,因而能更好地用于材料设计与界面调控工艺;②不仅给出界面剪应力,还可给出界面正应力(或剥离力),因而更适用于分析界面分离,界面脱粘,基体开裂临界应力和纤维桥联增韧效
补充资料:金属纤维增强生物活性玻璃陶瓷复合材料
分子式:
CAS号:

性质:是将直径为50μm、100μm和200μm的316L不锈钢丝或钛合金丝,彼此交联构成纤维网络,再用45S5(45%SiO2,6%P2O5,24.5%CaO和24.5%Na2O)生物玻璃浸渍,然后冷却、退火而制得。植入体内后,通过生物活性玻璃表面形成羟基磷灰石层能与骨形成骨键后,可用作承力的骨替换材料。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条