说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 闪光焊接
1)  flash welding
闪光焊接
1.
The welding of billets was simulated on UN 100 preheat flash welding machine for 20MnSi steel, the rolling experments was performed on φ300 mill, then the hardness and structure of the welded joint after deformation was studied.
研究了棒线材无头轧制的工艺参数 ,选择 2 0 Mn Si钢作为研究对象 ,采用预热闪光焊接模拟高温状态下的坯料焊接。
2.
The weld is required to have similar properties as the matrix of the bar and wire produced by endless rolling process The welding of 20MnSi steel was simulated with UN 100 preheat flash welding machine,the rolling experiments was carried out on φ300 mill,the influence of elongation coefficient on the structure,plasticity and toughness of the weld was studied.
以 2 0 Mn Si钢为研究对象 ,采用预热闪光焊接模拟高温状态下的坯料焊接 ,焊后轧制使用 30 0轧机。
3.
The 20MnSi steel blank high temperature welding was simulated by UN-100 preheat flash welding machine for the rolling was performed on φ 300 mill, then the influence of upset force on the structure, plasticity and toughness of the welded area was studied.
本文以 2 0 Mn Si钢作为研究对象 ,焊接实验用 UN- 10 0型闪光焊机 ,采用预热闪光焊接模拟高温状态下的坯料焊接 ,轧制用 30 0轧机。
2)  spark contact welding
闪光接触焊
1.
Based on new technical standards and construction characteristics,an automatic flow production line for long rail welding is set up at the track base of the passenger transport line,and the key technologies are summarized for long rail spark contact welding.
根据新技术标准和施工工艺特点,在客运专线铺轨基地建造了全自动的长钢轨焊接流水生产线,总结出了长钢轨闪光接触焊的施工关键技术。
3)  flashlight weld
闪光对焊接
1.
Design all adoptions HRB400 reinforcing bar(x-rated steel),under construction adoption roll-press thread connect,electricity pressure weld,flashlight weld,electricity weld takes to connect with colligation takes to connect various conjunctions method.
设计全部采用HRB400钢筋(三级钢),施工采用滚压直螺纹连接、电渣压力焊接、闪光对焊接、电弧焊搭接与绑扎搭接多种连接方法。
4)  resistance flash butt welding
闪光对接焊
5)  flash butt welding
对接闪光焊
6)  flash butt welding
闪光碰焊,闪光对接焊
补充资料:M级闪光灯泡

m级闪光灯泡

m class bulb

系镜头上快门上m接点用的闪光灯泡。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条