1) diffusive healing
扩散愈合
2) diffusion bonding
扩散复合
1.
Microstructure and mechanical properties of diffusion bonding brass/steel bimetal;
黄铜/钢扩散复合双金属界面组织与性能
2.
The diffusion bonding was carded out between commercially pure titanium and carbon steel 15 in the temperature range of 700-950℃for 0.
用扫描电镜、能谱分析、X-光衍射和拉剪试验等方法,研究了扩散退火温度与时间对钛-钢扩散复合界面附近组织、成分和界面剪切强度的影响。
3) diffusion bonding
扩散接合
1.
In order to study the effect of diffusion bonding technology parameters on the joint strength of MoSi2 heating element cold-hot end,the technological papameters such as temperature,pressure,holding time and atmosphere were researched.
为了研究扩散接合工艺参数对二硅化钼发热元件冷热端的接合强度的影响,对接合端面状态、接合温度、保温时间、接合压力和接合气氛等工艺条件进行了对比分析,并根据接合部位的断裂强度和微观结构的研究结果,建立了在本实验条件下最佳发热元件冷热端扩散接合工艺条件:接合端面粗糙度为1。
2.
By using small unit of Vacuum diffusion bonding the diffusion bonding of copper and carbon steel 45(carbon 0.
利用自制小型真空扩散接合装置研究了铜与45钢的扩散接合,并对接合区的原子迁移行为及组织和硬度变化进行了分析。
3.
The experimental research on'diffusion bonding of spheroidal graphite cast iron and copper is conducted by adopting the self-made equipment of small vacuum diffusion bonding.
采用自制的小型真空扩散接合装置,进行了球铁与铜扩散接合试验研究。
4) Combined diffusion
联合扩散
6) coupled diffusive effect
耦合扩散
1.
Numerical simulation of the cross coupled diffusive effects on indoor air environment;
交叉耦合扩散效应对室内环境影响的数值研究
补充资料：骨折畸形愈合
骨折畸形愈合
骨折的远近端之间发生重叠、旋转、成角连接而引起肢体功能障碍的愈合现象。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条