1) alumina-plated film
镀氧化铝薄膜
1.
Properties and processes of poly(vinyl alcohol) films,monox-plated films, alumina-plated films, films with air permeability, and shielding films with electro-magnetics developed in recent years were introduced.
介绍了国内外近年来新开发的聚乙烯醇薄膜、镀氧化硅薄膜、镀氧化铝薄膜、微波炉用电磁屏蔽薄膜及透气性薄膜等几种功能性薄膜的特性及生产技术。
2) alumina film
氧化铝薄膜
1.
In order to find out internal relation between anodizing voltage and pore diameter of alumina film, (alumina) films with nano-pore structure were prepared by anodic oxidation of aluminum in 2~0_0H_3PO_4 at the anodizing voltage from 40 V to 150 V.
为了确定电解电压与氧化铝薄膜纳米孔孔径之间的内在关系,以200的磷酸为电解液,在40~150V的电解电压范围内,对铝基材实施阳极氧化制备了具有纳米孔结构氧化铝薄膜。
2.
Amorphous alumina films with thickness about 50nm are fabricated by reactive sputtering in Ar and O2 mixture.
用反应溅射方法制备了非晶氧化铝薄膜；以 Ａｌ／ａ－Ａｌ２Ｏ３／Ａｌ电容器为载体，研究了此种电容器的电容量，随样品放置时间的衰减过程及其影响因素，结论如下：（１）同一样品，高频下测得的电容随样品放置时间而变小的趋势相对于低频值要缓慢。
3) aluminum oxide film
氧化铝薄膜
1.
Application of Pulsed Sputtering Technology in Aluminum Oxide Films Deposition;
脉冲溅射技术在氧化铝薄膜沉积中的应用
4) Metallized films
镀铝薄膜
5) monox-plated film
镀氧化硅薄膜
1.
Properties and processes of poly(vinyl alcohol) films,monox-plated films, alumina-plated films, films with air permeability, and shielding films with electro-magnetics developed in recent years were introduced.
介绍了国内外近年来新开发的聚乙烯醇薄膜、镀氧化硅薄膜、镀氧化铝薄膜、微波炉用电磁屏蔽薄膜及透气性薄膜等几种功能性薄膜的特性及生产技术。
6) silica plating film
氧化硅蒸镀薄膜
1.
The property and preparation of three kinds of environmental high barrier packaging materials such as poly(ethylene-2,6-naphthalenedicarboxylate),poly(vinyl alcohol) and silica plating film are introduced,and the domestic progress,for example,the progress of melting properties of PEN/PET,compound and modifying PVA and SiOx prepared by using different plating methods are reviewed in this paper.
综述了几种环境友好的高阻隔包装材料聚2,6-萘二甲酸乙二酯(PEN)、聚乙烯醇(PVA)、氧化硅蒸镀薄膜的性能和制备工艺,以及PEN结合PET的共混特性、PVA复合及改性和利用不同的蒸镀技术蒸镀制得SiOx薄膜等一些国内的研究进展,并指出随着环境的恶化,加强对环保协调、性能优良的高阻隔包装材料的开发是当今阻隔材料的研究重点。
补充资料：真空镀铝薄膜
分子式：
CAS号：
性质：一类镀铝的塑料薄膜包装材料。呈多种颜色金属光泽，具有相应的铝箔的特性。多以聚酯、尼龙、聚丙烯、低密度聚乙烯薄膜为基材，在真空室内，使加热成蒸气的金属铝冷凝在基材上而成。镀层厚度约0.025μm，但性能可似铝箔，代替铝箔应用于食品薄膜包装，可大量节约用铝。
CAS号：
性质：一类镀铝的塑料薄膜包装材料。呈多种颜色金属光泽，具有相应的铝箔的特性。多以聚酯、尼龙、聚丙烯、低密度聚乙烯薄膜为基材，在真空室内，使加热成蒸气的金属铝冷凝在基材上而成。镀层厚度约0.025μm，但性能可似铝箔，代替铝箔应用于食品薄膜包装，可大量节约用铝。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条