说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 细丝埋弧焊
1)  thin wire submerged arc welding
细丝埋弧焊
2)  twin thin wire submerged arc welding
双细丝埋弧焊
1.
This method is using twin thin wire submerged arc welding and ceramic backing.
细丝埋弧焊+陶瓷衬垫可用于无间隙装配、坡口内定位焊、背面应用陶瓷衬垫+正面大能量输入的双细丝单面埋弧焊焊接,焊缝正反面一次成形。
3)  Submerged arc welding wires
埋弧焊丝
1.
This article is focused on the progress in the development of bridge steel 14MnNbq and its matching submerged arc welding wires of WQ series in Wuhan Iron and Steel Corporation.
重点介绍武钢首批试制的天兴洲大桥14MnNbq超厚板(60mm)与匹配的WQ系列桥梁钢埋弧焊丝研制进展情况。
2.
This article is focused on the progress in the development of bridge steel 14MnNbq and its matching submerged arc welding wires of WQ family in Wuhan Iron and Steel (Group) Corporation.
本文重点介绍了武钢首批试制的天兴洲大桥14MnNbq超厚板(60mm)与武钢技术中心开发研制的WQ系列桥梁钢埋弧焊丝匹配研制进展。
4)  submerged arc welding wire
埋弧焊丝
1.
and the development of submerged arc welding wire WQ-1.
重点介绍了武钢技术中心高层办公大楼用WGJ510C2耐火耐候钢(14 mm、25 mm)2种规格钢板与WQ-1埋弧焊丝匹配试验研究。
2.
Through reasonable design of wire rod, controlling the content of impurity elements, and adopting appropriate process, the author obtained a submerged arc welding wire rod.
对低合金高强度结构钢埋弧焊丝盘条的成分进行科学设计,控制盘条中杂质元素含量,采用合理的生产工艺,得到埋弧焊丝盘条,再其表面质量、金相组织、盘条及其焊接接头性能等进行系统试验分析,结果表明该盘条综合性能优良,在国家重点工程——润扬长江公路大桥的建设中得到批量运用,为我国高性能焊接结构提供了一种优质焊接材料。
3.
According to the requirement for the properties of X80 pipeline steel, The submerged arc welding wire for X80 pipeline steel and a new agglomerated flux for high strength-toughness steels were developed based on the technological route of strengthening acicular ferrite with bainite.
本文从X80管线钢的性能要求出发,确定以贝氏体强化针状铁素体的技术路线,研制出X80管线钢用埋弧焊丝以及高强度管线钢用埋弧焊剂。
5)  double-wire SAW
双丝埋弧焊
1.
Study on the technology and joint performance of double-wire SAW;
双丝埋弧焊工艺及焊接接头性能研究
6)  multiple wire submerged arc welding
多丝埋弧焊
1.
The effects of principal components of the agglomerated flux for the multiple wire submerged arc welding for pipeline steel on the operating characteristics were studied.
对管线钢用多丝埋弧焊烧结焊剂主要组分对焊接工艺性能的影响规律进行了试验研究,在此基础上研制出一种基于MgO-CaF_2-Al_2O_3-SiO_2-MnO-ZrO_2渣系、碱度BIIW在1。
补充资料:焊接:埋弧焊
        利用在焊剂层下燃烧的电弧进行焊接的方法(见图 埋弧焊示意图 )。在焊接过程中﹐焊剂熔化產生的液态熔渣覆盖电弧和熔化金属﹐起保护﹑净化熔池﹑稳定电弧和渗入合金元素的作用。埋弧焊分为自动埋弧焊和半自动埋弧焊两种。前者应用较广泛﹐焊接电流可达600~2000安﹐焊接效率很高。埋弧焊是一种适於大量生產的焊接方法﹐广泛用於焊接各种碳钢﹑低合金钢和合金钢﹐也用於不锈钢和镍合金的焊接和表面堆焊。为了提高焊接效率和扩大使用范围﹐埋弧焊的电极可採用双丝﹑三丝﹑带极(用於堆焊)﹐还可在焊剂中添加金属粉等。焊剂层下的电弧与焊件接口的对正和调整﹐可用工业电视观察或用激光跟踪等方法探测。埋弧焊的焊接效率高﹐焊缝光洁﹐无飞溅﹐少烟尘﹐无电弧闪光﹐劳动卫生条件好﹐设备成本较低。缺点是限於平焊和长焊缝。与气体保护电弧焊相比﹐埋弧焊电弧不可见﹐接头装配要求较高﹐应用灵活性也较差。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条