说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 激光变长线快速成型
1)  length alterable line scanning RP
激光变长线快速成型
2)  laser rapid prototyping
激光快速成型
1.
Stainless Steel Part by Laser Rapid Prototyping;
激光快速成型不锈钢零件的研究
2.
Investigation on the Fully Dense Metal Part by Laser Rapid Prototyping;
激光快速成型致密金属零件的研究
3.
The technology of server and client program for tele-controlling is introduced by the application of HRPS laser rapid prototyping.
阐述了 基于TCP/IP协议、客户端/服务器模式,广域网上对激光快速成型机床的远程访问和控制的设计 与实现方法,开发了远程控制软件。
3)  laser rapid molding
激光快速成型
1.
Manufacture and application of a kind of improved phenolic resin used as sintering flux to shape laser rapid molding sand mold was introduced.
介绍了激光快速成型砂型铸模用的一种烧结剂的制作和应用。
2.
The influence of process and performance of precoated sand used in laser rapid molding on laser sintering molding process,moulding precision and casting quality was discussed,and a kind of precoated sand sintering material which adapt to using laser rapid molding method to manufacture casting moulding directly is gained.
探讨了激光快速成型用覆膜砂的工艺性能对激光烧结成型、铸型精度和铸件质量的影响,进而得到适用于激光快速成型方法直接制造铸件铸型用的覆膜砂烧结材料。
4)  laser direct deposition
激光快速成型
1.
The mechanical properties of Ti 6Al 4V alloy fabricated by laser direct deposition were studied, the effect of low temperature anneal and hot isopressing on the mechanical properties were analyzed, the oxygen content of as deposited test pieces was measured, and the appearance of tensile fracture surface was observed.
金属零件的激光快速成型是结合CAD/CAM、高功率激光熔覆和快速原型制造的先进技术。
2.
This paper is focused on the research of the 316 L stainless steel prepared by laser direct deposition, especially on the influence of laser power on the microstructure and properties of the parts by laser direct deposition.
采用激光快速成型技术制备了316L不锈钢零件,研究了激光功率对激光快速成型不锈钢零件组织、性能的影响。
3.
The mechanical properties of Ti-6Al-4V alloy fabricated by laser direct deposition were studied, the effect of low-temperature anneal and hot isopressing on the mechanical proper-ties were analyzed, the oxygen content of as-deposited test pieces was measured, and the appearance of tensile fracture surface was observed.
金属零件的激光快速成型是结合CAD/CAM、高功率激光熔覆和快速原型制造的先进技术。
5)  laser rapid prototype
激光快速成型
1.
The whole processes of making complicated moulds by SLS were discussed,from establishing tri-dimension CAD model of part,cutting slices,forming laser scanning tracks,sintering on laser rapid prototype machine to post treatment process of part.
介绍了选择性激光烧结的工作原理,阐述了用SLS技术制作复杂模具,即从三维CAD模型的建立、分层、激光扫描路径形成、激光快速成型机烧结到后处理的完整工艺过程,分析了制造工艺中的注意事项并给出了成型件实物模型。
6)  laser quick-form
激光快速成型
1.
Application study on laser quick-formed technology in product design;
激光快速成型技术在产品设计中的应用研究
2.
According to 3-D model,laser quick-formed technology based on three-dimensional CAD may make out the mod- els in short time which are used for verifying or appraising the product design.
基于三维 CAD 的激光快速成型技术,根据三维模型,可在短时间内制造出用于验证、评价所设计的产品模型。
补充资料:激光快速成形技术的简单介绍

激光快速成形(Laser Rapid Prototyping:LRP)是将CAD、CAM、CNC、激光、精密伺服驱动和新材料等先进技术集成的一种全新制造技术。与传统制造方法相比具有:原型的复制性、互换性高;制造工艺与制造原型的几何形状无关;加工周期短、成本低,一般制造费用降低50%,加工周期缩短70%以上;高度技术集成,实现设计制造一体化。
     LPR主要包括:立体光造型(SLA) 技术;选择性激光烧结(SLS) 技术;激光熔覆成形(LCF)技术;激光近形(LENS)技术;激光薄片叠层制造(LOM) 技术;激光诱发热应力成形(LF)技术及三维印刷技术等。



     立体光造形(SLA)技术



     SLA技术又称光固化快速成形技术,其原理是计算机控制激光束对光敏树脂为原料的表面进行逐点扫描,被扫描区域的树脂薄层(约十分之几毫米)产生光聚合反应而固化,形成零件的一个薄层。工作台下移一个层厚的距离,以便固化好的树脂表面再敷上一层新的液态树脂,进行下一层的扫描加工,如此反复,直到整个原型制造完毕。由于光聚合反应是基于光的作用而不是基于热的作用,故在工作时只需功率较低的激光源。此外,因为没有热扩散,加上链式反应能够很好地控制,能保证聚合反应不发生在激光点之外,因而加工精度高),表面质量好,原材料的利用率接近100%,能制造形状复杂、精细的零件,效率高。对于尺寸较大的零件,则可采用先分块成形然后粘接的方法进行制作。
     美国、日本、德国、比利时等都投入了大量的人力、物力研究该技术,并不断有新产品问世。我国西安交通大学也研制成功了立体光造型机LPS600A。目前,全世界有10多家工厂生产该产品。
     ●在汽车车身制造中的应用 SLA技术可制造出所需比例的精密铸造模具,从而浇铸出一定比例的车身金属模型,利用此金属模型可进行风洞和碰撞等试验,从而完成对车身最终评价,以决定其设计是否合理。美国克莱斯勒公司已用SLA技术制成了车身模型,将其放在高速风洞中进行空气动力学试验分析,取得了令人满意的效果,大大节约了试验费用。
     ●用于汽车发动机进气管试验 进气管内腔形状是由十分复杂的自由曲面构成的,它对提高进气效率、燃烧过程有十分重要的影响。设计过程中,需要对不同的进气管方案做气道试验,传统的方法是用手工方法加工出由几十个截面来描述的气管木模或石膏模,再用砂模铸造进气管,加工中,木模工对图纸的理解和本身的技术水平常导致零件与设计意图的偏离,有时这种误差的影响是显著的。使用数控加工虽然能较好地反映出设计意图,但其准备时间长,特别是几何形状复杂时更是如此。英国Rover公司使用快速成型技术生产进气管的外模及内腔模,取得了令人满意的效果。


说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条