1) electropulsing treatment
电脉冲处理
1.
In order to further improve the shape memory effect(SME) and process efficiency of FeMnSiCrNiNbC alloy,the effects of different electropulsing treatment on microstructure and SME of the alloy were investigated.
为了进一步提高FeMnSiCrNiNbC合金的形状记忆性能以及提高其处理的效率,研究不同电脉冲处理对合金显微组织及形状记忆效应的影响。
2.
In order to further enhance shape memory effect (SME) and improve treatment process in Fe-based shape memory alloys, a pre-deformed Fe-Mn-Si-Cr-Ni-Nb-C alloy was subjected to a electropulsing treatment.
研究了电脉冲处理对FeMnSiCrNiNbC合金形状记忆效应的影响,并对其微观机理进行初步探讨。
3.
Changes of the dislocations in the TiC_p-reinforced Ni-Cr alloy under the electropulsing treatment;
TiC颗粒增强Ni80 Cr2 0 合金经电脉冲处理后 ,位错组态发生规整化、平直化排列 ,位错堆积形成位错墙。
2) EPM
电脉冲孕育处理
1.
Inoculation Fading of Electric Pulsed Modification (EPM) on Al-22Si Alloy;
电脉冲孕育处理Al-22Si合金衰退性的研究
2.
Effects of electric pulse magnetic field (EPM)on morphology and fracture of primary Si phase in KS282 alloy have been observed by SEM and DSC.
结果发现,电脉冲孕育处理对多元高硅铝合金有变质作用,增加了合金凝固过程的热力学过冷度,提高了初生硅相形核率。
3.
The effects of electric pulse modification(EPM) on the hot cracking tendency of Al-5Cu alloy have been investigated.
研究了不同电脉冲孕育处理参数对Al-5Cu合金热裂倾向的影响。
3) Electric pulse modification
电脉冲孕育处理
1.
Effects of electric pulse modification on aging process of AI-Cu-Mn alloy;
电脉冲孕育处理对Al-Cu-Mn合金时效过程的影响
2.
Effect of electric pulse modification on the structure and mechanical properties of Al-5%Cu-0.8%Mn alloy;
电脉冲孕育处理对Al-5%Cu-0.8%Mn合金组织及性能的影响
3.
Effects of electric pulse modification(EPM)parameters on aging process of AI-Cu-Mu alloy were investigated.
考察了不同电脉冲孕育处理参数对 Al-Cu-Mn 合金时效过程的影响,结果表明：电脉冲孕育处理加速了 Al-5%Cu-0。
4) Electric Pulse
电脉冲孕育处理
1.
Effect of electric pulse modification on the solidification structure of pure aluminum;
电脉冲孕育处理对纯铝凝固组织的影响
2.
Hereditary Characterization of Electric Pulse Modified Aluminum Melt;
通过对电脉冲孕育处理试样的重熔试验,研究了铝熔体在该条件下的遗传特征。
5) electropulsing
脉冲电流处理
1.
The influence of electropulsing on the microstructure of RS Al 92.
研究了超短脉冲电流处理对快凝Al92 3Fe4 3V0 7Si1 7Nd1 0 纳米晶合金薄带相稳定性的影响 ,并与等温时效处理结果进行了比较 ,基体Al晶粒尺寸和析出相颗粒尺寸减小 ,亚稳相向稳定相转变速度加快 ,相转变温度降低约 10 0℃ ;理论分析表明 :外场使相转变激活能、临界核心半径和形核功下降 ,从而提高形核率 ,并对新相长大有促进作用。
2.
Structure relaxation occurred in Fe 78 Si 9B 13 amorphous treated by ultrashort electropulsing.
非晶态合金Fe78Si9B1 3样品经短时超短脉冲电流处理 ,发生了结构弛豫 ,用DTA方法及Kissinger方程计算非晶样品的晶化激活能 ,用穆斯堡尔谱学方法研究了试样在电脉冲处理后的无反冲分数的变化 。
3.
The continual high current density electropulsing and comparable isothermal annealing of Fe78Si9B13 amorphous alloy have been carried out.
对非晶Ｆｅ（７８）Ｓｉ９Ｂ（１３）合金进行了连续高密度超短脉冲电流处理和对应的等温退火处理，用Ｍｏｓｓｂａｕｅｒ谱学技术研究处理后非晶试样的微观结构变化与晶化行为。
6) Electro-pulsing Modification
电脉冲变质处理
1.
Influence of Electro-pulsing Modification on the Microstructure and Properties of Zl108 Alloy;
电脉冲变质处理对ZL108合金性能的影响
补充资料：脉冲电磁场
见瞬变电磁场。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条