3) aluminum alloy sheet
铝合金薄板
1.
Theoretical inquiry into ductile fracture mechanism and modification of ductile fracture criterion based on aluminum alloy sheet;
韧性断裂机理的理论探讨与基于铝合金薄板韧性断裂准则的修正
2.
2 mm thick 5A06 aluminum alloy sheet with filler wire were investigated based on the existing problems by YAG laser welding of sheet plate,which included narrow scope of welding procedure and strict restriction of the gap tolerance and so on.
2mm厚5A06铝合金薄板YAG激光焊接工艺范围窄和对间隙要求严格等问题,较系统地研究了该铝合金激光填丝焊接工艺。
4) Ti-based alloy sheet
钛合金薄板
1.
Ti-based alloy sheet fabricated by Electron Beam Physical Vapour Deposition (EB-PVD) has been alumetized by powder investment,and the phase evolution of sheet at the different temperature has been studied.
对电子束物理气相沉积(EB-PVD)技术制备的钛合金薄板进行粉末包埋法渗铝,研究不同温度渗铝后的相结构转变规律。
2.
The microstructure of Ti-based alloy sheet prepared by Electron Beam Physical Vapour Deposition (EB-PVD) and Aluminizated by Pack were studied by X-ray Diffraction (XRD), Optics Microscope (OM), Scanning Electron Microscope (SEM), and so on.
采用X射线衍射仪(XRD)、光学显微镜(OM)、扫描电子显微镜(SEM)等对电子束物理气相沉积(EB-PVD)制备的及粉末包埋法渗铝后的钛合金薄板微观组织结构进行研究。
3.
Ti-based alloy sheet fabricated by Electron Beam Physical Vapour Deposition(EB-PVD)has been alumetized by powder investment,and the phase evolution of sheet at the different temperature has been studied.
对电子束物理气相沉积(EB-PVD)技术制备的钛合金薄板进行粉末包埋法渗铝,研究不同温度渗铝后的相结构转变规律。
5) magnesium alloy sheets
镁合金薄板
1.
Adaptive arc length control for magnesium alloy sheets TIG welding;
镁合金薄板TIG焊自适应弧长控制
6) Ni20.3Cr4.6Co2.1Al alloy sheet
Ni20.3Cr4.6Co2.1Al合金薄板
补充资料：机械合金化高温合金管材和方型材
机械合金化高温合金管材和方型材
机械舍金化高温合金管材和方型材
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条