说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 高频电脉冲沉积
1)  high frequency electro-spark deposition
高频电脉冲沉积
1.
5Al alloy by high frequency electro-spark deposition technique with home-made equipement.
采用自行研制的高频电脉冲沉积 (HFESD)设备在Fe2 0Cr4。
2.
Aluminide micro-crystalline coatings with the grain size from several tens to several hundreds nano meters were developed on the 1Cr18Ni9Ti stainless steel by means of a high frequency electro-spark deposition technique.
采用新型高频电脉冲沉积技术在1Cr18Ni9Ti不锈钢表面上获得了晶粒尺寸约为几十到几百纳米的微晶铝化物涂层在1000℃空气中恒温氧化100h的实验结果表明:获得的铝化物微晶涂层具有优异的抗高温氧化性能,而且显著提高了氧化膜的抗剥落能力。
2)  high-frequency electro-spark deposition
高频电脉冲沉积技术
1.
A micro-crystalline MA956 ODS alloy coating of about 50mm thick was developed on the 1Cr18Ni9Ti stainless steel by means of a high-frequency electro-spark deposition technique.
采用高频电脉冲沉积技术在1Cr18Ni9Ti不锈钢表面上沉积了厚度约为50μp的MA956 ODS合金纳米微晶涂层、涂层与基体之间呈现良好的冶金结合。
3)  pulse electrodeposition
脉冲电沉积
1.
Process of pulse electrodeposition of nanocrystalline Ni-Cr alloy from trivalent chromium bath;
三价铬脉冲电沉积纳米晶Ni-Cr合金工艺
2.
Pt-Ru-La/C electrocatalyst for DMFC prepared by pulse electrodeposition;
脉冲电沉积法制备DMFC用Pt-Ru-La/C电催化剂
3.
Cobalt/platinum multilayer prepared by pulse electrodeposition in a single cell and its characterization;
单槽脉冲电沉积制备钴/铂多层膜及其性能表征
4)  electro-pulse deposition
电脉冲沉积
1.
High temperature corrosion behavior of microcrystalline aluminide coatings by electro-pulse deposition;
电脉冲沉积铝化物微晶涂层的高温腐蚀行为
5)  pulse current electrodeposition
脉冲电沉积
1.
A nanostructured nickel alloy and a Ni/Si3N4(w) composite were fabricated by pulse current electrodeposition,and their superplastic tensile deformation behaviors were investigated at strain rates ranging from 1×10?3 to 2×10?2 s?1 and temperatures ranging from 673 to 823 K.
采用脉冲电沉积技术制备纳米镍合金及Ni/Si3N4(w)复合材料,在应变速率为1×10-3~2×10-2 s-1,温度为673~823 K的条件下,研究它们的超塑性拉伸变形行为,确定最佳超塑性条件并获得最大伸长率。
6)  pulse plating
脉冲电沉积
1.
Based on study on the influence of solution composition and pulse parameters, namely, pulse on-time, off-time and peak current density on deposition layer in the pulse plating process, desirable diamond tools are easily obtained by using the alternating pulse deposition.
课题主要研究了脉冲电沉积法制备纳米镍钴材料的制备工艺及所制备材料的性能,并对该技术如何应用在金刚石工具进行了研究。
2.
,metal Cu nanocrystalline layers were plated on the surface of metal substrates by pulse plating,then the Cu nanocrystalline layers were used to synthesize CuO nanoneedles by thermal oxidation method at 700℃ in the air.
采用脉冲电沉积技术在金属 Cu 基板表面电沉积纳米晶 Cu 薄膜,在空气中采用热氧化法制备出一维金属 CuO 纳米针材料。
补充资料:甚高频和超高频多普勒雷达
      工作在30~3000兆赫频段的气象多普勒雷达。一般具有很高的探测灵敏度。因探测高度范围可达1~100公里,所以又称为中层-平流层-对流层雷达 (MST radar)。它主要用于探测晴空大气的风、大气湍流和大气稳定度(见大气静力稳定度)等大气动力学参数的铅直分布。
  
  原理  这类雷达通过以下几类电磁波和大气的相互作用,对晴空大气进行探测:①由大气湍流运动引起的折射率不均匀结构对电磁波的散射;②稳定大气分层结构对入射电磁波的部分反射;③有时出现于中层大气的自由电子对电磁波的散射;④中层大气中的流星余迹散射。散射体积内空气的运动,使雷达回波具有多普勒频偏。
  
  结构  MST 雷达的结构和气象多普勒雷达大致相同。其特点在于:它们一般配备了大型天线(天线阵),有些甚高频段雷达的天线阵,尺度达 30~200米,采用半波振子阵或八木天线振子阵,以相控方式实现波束扫描。超高频段雷达采用直径几十米的可动抛物面天线,这类雷达的发射功率在几百千瓦至 2兆瓦之间,发射功率和天线面积的乘积值在106~1010瓦·米2之间。此外,为获得高灵敏度和高空间分辨率,在脉冲发射体制和回波数据处理方面,也采取一些技术措施。
  
  用途  利用回波的多普勒频谱可以进行下述各项测量:①探测大气风场的铅直分布。同一仰角,空间分辨率约为 150~1000米,采用脉冲压缩技术后,分辨率已可达到15米。②探测大气湍流结构。可以给出平均折射率湍流结构常数(C厒)的铅直分布。再引入一些大气湍流模式后,可以推算出湍流耗散率的铅直分布。③探测对流层顶高度及逆温层的高度和厚度。目前,甚高频和超高频多普勒雷达还只能测定上述气象要素的铅直廓线及其时间变化,而不能给出三维空间分布资料。
  
  

参考书目
   K.S.Gage,B.B.Balsley,Doppler Radar Probing of the Clear Atmosphere,Bulletin of American MeteorologicalSociety,Vol.59,No.9,pp.1074~1093,1978.
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条