布置位置,the layout location,音标,读音,翻译,英文例句,英语词典

您的位置：首页 -> 词典 -> 布置位置

1) the layout location 点击朗读

布置位置

例句>>

2) position of high drainage 点击朗读

层位布置

3) positional distribution 点击朗读

位置分布

A high performance liquid chromatographic (HPLC) method for the determination of fatty acid positional distribution on triacylglycerols from lard has been established.

建立了一种采用高效液相色谱法(HPLC)分析猪油甘油三酯中的脂肪酸组成及其位置分布的方法。

The study was carried on through the following four aspects: lexical density,lexical frequency,positional distribution and semantic distribution.

采用基于语料库的定性和定量相结合的方法对海事英语语篇从词汇密度、词频、位置分布和语义分布4个方面进行研究,得出海事英语语篇中连接词的使用特点。

更多例句>>

4) lower-position arrangement 点击朗读

低位布置

This paper analyzes the influence of the height of water column on wheat straw pulp washing and brings forward the design proposal for lower-position arrangement of drum vacuum washer for wheat straw pulp washing.

根据鼓式真空洗浆机脱水的基本原理,浅析了鼓式真空洗浆机对麦草浆洗涤所需的脱水水柱,并提出了鼓式真空洗浆机低位布置的设计方案。

5) pile layout 点击朗读

桩位布置

Combined with practical work,from pile layout,loading case,internal force calculation,earth-retaining and slope protection,the design of excavation stakes and other aspects the deep foundation design is introduced as well as construction measures.

结合工程实例,从桩位布置、作用荷载、内力计算、挡土护坡挖孔桩的设计多方面介绍了深基础的设计,提出了基础构造措施,阐明了带地下室的深基础采用桩墙合一、自支护逆作法施工的诸多优点。

更多例句>>

6) arrangement of bridge site 点击朗读

桥位布置

补充资料：ANSYS SOLID65环向布置钢筋的例子

ANSYS SOLID65环向布置钢筋的例子
! 一个管道，环向配筋率为1%，纵向配筋率为0.5%，径向配筋率为0.1%
! 作者: 陆新征清华大学土木系
!
FINISH
/CLEAR

/PREP7
!*
! 单元属性
ET,1,SOLID65
!*
KEYOPT,1,1,0
KEYOPT,1,5,0
KEYOPT,1,6,0
KEYOPT,1,7,1
!*
!实参数1：不同方向配筋
R,1,2,.001, , ,2, .01,
RMORE, 90, ,2,.005 ,90 ,90 ,

!材料属性
!混凝土基本材料属性
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,30E2
MPDATA,PRXY,1,,.2
!屈服准则
TB,MISO,1,1,5,
TBTEMP,0
TBPT,,0.0005,15
TBPT,,0.001,21
TBPT,,0.0015,24
TBPT,,0.002,27
TBPT,,0.003,24
!破坏准则
TB,CONC,1,1,9,
TBTEMP,0
TBDATA,,.5,.9,3,30,,
TBDATA,,,,1,,,
MPTEMP,,,,,,,,
MPTEMP,1,0
!钢材基本属性
MPDATA,EX,2,,200E3
MPDATA,PRXY,2,,.27
!屈服准则
TB,BISO,2,1,2,
TBTEMP,0
TBDATA,,310,2E3,,,,

! 管道内径和外径
CYL4,0,0,3000, , , ,10000
CYL4,0,0,2000, , , ,10000
VSBV, 1, 2

! 定义局部柱坐标
CSWPLA,11,1,1,1,
KWPAVE, 11
WPRO,,-90.000000,
VSBW, 3
WPCSYS,-1,0
KWPAVE, 1
WPRO,,,-90.000000
VSBW,ALL

ESIZE,500,0,
! 注意：设定单元局部坐标
VATT, 1, 1, 1, 11
!*
VSWEEP,ALL
/DEVICE,VECTOR,1
/ESHAPE,1.0
/REPLO
! 注意：红色代表最大配筋方向，绿色代表其次，蓝色表示最小配筋方向

说明：补充资料仅用于学习参考，请勿用于其它任何用途。

参考词条

货位布置错位布置部件位置布置方位，部位，位置，配置，排列，布局，布置，放置定位销布置位置分布族

孔位布置布局位置布设位置闸位布置布尔位置井位布置

说明：双击或选中下面任意单词，将显示该词的音标、读音、翻译等；选中中文或多个词，将显示翻译。
	您的位置：首页 -> 词典 -> 布置位置 1) the layout location 布置位置例句>> 2) position of high drainage 层位布置 3) positional distribution 位置分布 1. A high performance liquid chromatographic (HPLC) method for the determination of fatty acid positional distribution on triacylglycerols from lard has been established. 建立了一种采用高效液相色谱法(HPLC)分析猪油甘油三酯中的脂肪酸组成及其位置分布的方法。 2. The study was carried on through the following four aspects: lexical density,lexical frequency,positional distribution and semantic distribution. 采用基于语料库的定性和定量相结合的方法对海事英语语篇从词汇密度、词频、位置分布和语义分布4个方面进行研究,得出海事英语语篇中连接词的使用特点。更多例句>> 4) lower-position arrangement 低位布置 1. This paper analyzes the influence of the height of water column on wheat straw pulp washing and brings forward the design proposal for lower-position arrangement of drum vacuum washer for wheat straw pulp washing. 根据鼓式真空洗浆机脱水的基本原理,浅析了鼓式真空洗浆机对麦草浆洗涤所需的脱水水柱,并提出了鼓式真空洗浆机低位布置的设计方案。 5) pile layout 桩位布置 1. Combined with practical work,from pile layout,loading case,internal force calculation,earth-retaining and slope protection,the design of excavation stakes and other aspects the deep foundation design is introduced as well as construction measures. 结合工程实例,从桩位布置、作用荷载、内力计算、挡土护坡挖孔桩的设计多方面介绍了深基础的设计,提出了基础构造措施,阐明了带地下室的深基础采用桩墙合一、自支护逆作法施工的诸多优点。更多例句>> 6) arrangement of bridge site 桥位布置补充资料：ANSYS SOLID65环向布置钢筋的例子 ANSYS SOLID65环向布置钢筋的例子 ! 一个管道，环向配筋率为1%，纵向配筋率为0.5%，径向配筋率为0.1% ! 作者: 陆新征清华大学土木系 ! FINISH /CLEAR /PREP7 !* ! 单元属性 ET,1,SOLID65 !* KEYOPT,1,1,0 KEYOPT,1,5,0 KEYOPT,1,6,0 KEYOPT,1,7,1 !* !实参数1：不同方向配筋 R,1,2,.001, , ,2, .01, RMORE, 90, ,2,.005 ,90 ,90 , !材料属性 !混凝土基本材料属性 MPTEMP,,,,,,,, MPTEMP,1,0 MPDATA,EX,1,,30E2 MPDATA,PRXY,1,,.2 !屈服准则 TB,MISO,1,1,5, TBTEMP,0 TBPT,,0.0005,15 TBPT,,0.001,21 TBPT,,0.0015,24 TBPT,,0.002,27 TBPT,,0.003,24 !破坏准则 TB,CONC,1,1,9, TBTEMP,0 TBDATA,,.5,.9,3,30,, TBDATA,,,,1,,, MPTEMP,,,,,,,, MPTEMP,1,0 !钢材基本属性 MPDATA,EX,2,,200E3 MPDATA,PRXY,2,,.27 !屈服准则 TB,BISO,2,1,2, TBTEMP,0 TBDATA,,310,2E3,,,, ! 管道内径和外径 CYL4,0,0,3000, , , ,10000 CYL4,0,0,2000, , , ,10000 VSBV, 1, 2 ! 定义局部柱坐标 CSWPLA,11,1,1,1, KWPAVE, 11 WPRO,,-90.000000, VSBW, 3 WPCSYS,-1,0 KWPAVE, 1 WPRO,,,-90.000000 VSBW,ALL ESIZE,500,0, ! 注意：设定单元局部坐标 VATT, 1, 1, 1, 11 !* VSWEEP,ALL /DEVICE,VECTOR,1 /ESHAPE,1.0 /REPLO ! 注意：红色代表最大配筋方向，绿色代表其次，蓝色表示最小配筋方向说明：补充资料仅用于学习参考，请勿用于其它任何用途。参考词条货位布置错位布置部件位置布置方位，部位，位置，配置，排列，布局，布置，放置定位销布置位置分布族

©2011 dictall.com