说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 注浆浆液
1)  Grouting slurry
注浆浆液
1.
Due to the large quantity of fly ash added could effectively reduce the cost of the grouting slurry,the grouting slurry with a quality and quantity ratio of the cement,fly ash,clay,quicklime and sodium sulfate with the water content as 1∶0.
由于掺入粉煤灰可以有效降低注浆浆液的成本,所以选取质量比为水泥∶粉煤灰∶黏土∶生石灰∶硫酸钠∶水=1∶0。
2)  Two-shot grouting
双液注浆
1.
Design and application of new anti-aqueous dispersions and anti-aqueous solubility two-shot grouting material;
新型抗水分散和抗水溶蚀双液注浆材料的设计与应用
2.
Workability and gelling performance of new two-shot grouting material with anti-aqueous dispersion and anti-aqueous solubility;
新型抗水分散和抗水溶蚀双液注浆材料的工作性能及胶凝性能
3.
Traditional cement-sodium-silicate two-shot grouting materials was widely applied to filling, soil stabilization, strengthening and mitigation of water ingress to underground facilities due to its characteristics of rapid and adjustable gel-time and good working performance etc.
传统水泥-水玻璃双液注浆材料凝胶迅速,工作性能良好,被广泛应用于填充、加固、防水堵漏等工程中。
3)  double liquid grouting
双液注浆
1.
Application of double liquid grouting technology to strengthening bridge pile foundation on existing Guang-Shen line;
双液注浆工艺在既有广深桥桩基加固中的应用
2.
This article introduces deep foundation pit emergency repair of a high-rise building of Tianjin,using rigid fast-hardening water-stopping material on its negative side and double liquid grouting material on its positive side.
针对天津市区某高层建筑深基坑发生漏水涌砂的险情,介绍了在基坑内侧采用快硬性刚性止水材料堵漏和基坑外侧采用双液注浆堵漏的抢险措施。
3.
Combined with the construction in the section of water gushing at the entrance of Zhoucangling tunnel,the author introduces that man can achieve the expected effect of water gushing control with the method combining long borehold detection,lead small conduit pre-support with double liquid grouting,which solve the problem of water gushing in tunnel.
介绍了周仓岭隧道出口涌水段施工中,采用长钻孔探测、超前小导管预支护、双液注浆相结合的方法,达到了预期的治理涌水的效果,解决了隧道涌水的难题。
4)  grouting fluid
注浆液
1.
The properties and requriments of pressure grouting fluid are introduced.
介绍了压力注浆液的性能和要求;根据不同地质条件下注浆工艺的不同,建立了各自的数学模型;并在实践中得到应用和验证。
5)  bi-slurry grouting method
双液注浆法
1.
The bi-slurry grouting method is referred to drilling hole at water seepage area at the water blocking curtain to find out seepage channel then grout the mixture of water glass solution and cement slurry into the channel.
双液注浆法是在止水帷幕的渗漏处钻孔,找到基坑止水帷幕的渗漏通道,把一定浓度的水玻璃溶液及水泥浆溶液的混合液注入渗漏通道中,水玻璃与水泥浆的混合液快速凝结、迅速封住渗漏通道,起到隔水的作用。
6)  double-mortar grouting
双液法注浆
1.
According to the features of underground karst and collapsible soil holes, the triple-pipe high pressure jet grouting and double-mortar grouting methods are adopted to consolidate the foundation of the site, so the hidden danger of safety has been eliminated.
根据建筑场地地下岩溶和塌陷土洞的特征 ,采用三重管高压旋喷和双液法注浆的方法对该场地进行加固处理 ,消除了安全隐
补充资料:电泳注浆成型
分子式:
CAS号:

性质:陶瓷浆料的成型方法之一。利用浆料中颗粒荷负电,在直流电场作用下向阳极运动而沉积在模型(阳极)上形成坯体的成型方法。此法可加快坯体形成速度,坯体较致密,可用于面砖,基板等的成型,但有时会因水的电解作用产生气泡,电场不均匀会造成坯体厚薄不均或脱模困难,故尚未得到广泛使用。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条