说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 镍系顺丁橡胶
1)  NiBR
镍系顺丁橡胶
1.
The physical properties,especially abrasion resistance and heat build up were improved by replacing NiBR with the same amount of NdBR in tire crown compound;but the mixing process had to be adjusted because of the poor processibility and lower carbon black dispersity.
在轮胎胎冠胶中以钕系顺丁橡胶等量替代镍系顺丁橡胶 ,可改善胶料的物理性能 ,尤其是耐磨性和生热 ,但工艺性能下降 ,炭黑分散度减小 ,需对混炼工艺进行调整。
2.
An experimental study was made on the properties of raw NdBR and its compound by using conventional NiBR as control.
对钕系顺丁橡胶(NdBR)进行生胶和胶料性能试验,并与常规使用的镍系顺丁橡胶(NiBR)进行对比。
2)  NdBR
钕系顺丁橡胶
1.
Application of NdBR to tire crown compound;
钕系顺丁橡胶在轮胎胎冠胶中的应用
3)  cis-1,4-polybutadiene rubber
顺丁橡胶
1.
Developments of rare earth catalyst for cis-1,4-polybutadiene rubber;
合成顺丁橡胶用稀土催化剂的开发进展
2.
Structure and properties of cis-1,4-polybutadiene rubber/organic montmorillonite nanocomposites;
顺丁橡胶/有机蒙脱土纳米复合材料的结构与性能
3.
Low Mooney viscosity cis-1,4-polybutadiene rubber polymerized by nickel system catalyst;
镍系低门尼黏度顺丁橡胶
4)  butadiene rubber
顺丁橡胶
1.
Industrial development of rare earth butadiene rubber in China;
中国稀土顺丁橡胶的工业化开发
2.
Discussion on energy conservation technology in cis-1,4-polybutadiene rubber condensation;
顺丁橡胶凝聚节能降耗技术探讨
3.
Tensile stress-strain behavior of butadiene rubber/organo-montmorillonite nanocomposite Ⅰ.Stress-strain curves and its simulation;
顺丁橡胶/有机蒙脱土纳米复合材料的拉伸应力-应变行为 Ⅰ.应力-应变曲线及其理论模拟
5)  polybutadiene rubber
顺丁橡胶
1.
The application of Ni-family oil-extended polybutadiene rubber BR9073;
镍系充油顺丁橡胶BR9073的应用
2.
The effects of compounding recipes,carbon black,processing oil,as well as cure time on the properties of polybutadiene rubber synthesized by rare-earth catalyst(NdBR)were studied in this paper.
研究了胶料配方、炭黑、操作油以及硫化时间对稀土顺丁橡胶(NdBR)性能的影响。
3.
With the growing demand for polybutadiene rubber in China and the self-sufficient rate is decreased by years,the self-sufficient rate of butadiene is increased greatly.
国内顺丁橡胶需求越来越旺盛,自给率逐年下降,而其原料丁二烯市场国内自给率大幅提高。
6)  BR
顺丁橡胶
1.
Structure and properties of BR/OMMT nanocomposites prepared by solution intercalation method;
溶液插层法制备顺丁橡胶/有机蒙脱土纳米复合材料的结构与性能
2.
Study on silicone rubber/BR/EPDM blend;
硅橡胶/顺丁橡胶/乙丙橡胶共混材料的研究
3.
The Improvement Research about Grafting NP on BR;
壬基酚聚氧乙烯醚接枝改性顺丁橡胶的研究
补充资料:充油顺丁橡胶
分子式:
CAS号:

性质:通过一定的工艺技术,可以制备出具有更高分子量级的(更高门尼值的)顺丁橡胶,在胶液凝聚前再在其中混入25~50份的填充油,以代替顺丁橡胶的低分子量级分,再经凝聚、脱水、干燥、成型制成成品,这种充油后的顺丁橡胶即为充油顺丁橡胶。充油顺丁橡胶使顺丁橡胶加工性能得到了改善,提高了加工设备的生产能力,降低动力消耗,同时提高了制品的冲击弹性,动态生热亦有所降低,胶料挤出物外观光滑发亮。由于填充油的价格远较丁二烯低,并可提高炭黑用量,因而可降低加工成本。更重要的是,充油顺丁橡胶改善了抗湿滑性能。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条