1) semi solid thixo diecasting
半固态触变压铸
1.
Generation and distribution of pores in semi solid thixo diecastings is studied and the origin and influence factors of pores are analyzed.
研究了铝合金半固态触变压铸件中气孔的形成与分布 ,分析了气孔的来源及影响因素 ,认为半固态压铸件中可能的气体来源有半固态浆料自带的气体和半固态成形时新引入的气体 。
2) semi-solid die casting
半固态压铸
1.
The process parameters of semi-solid die casting of A356 aluminum alloy have been studied systematically in simple plate mould with different thickness.
应用具有不同厚度的简单板材模具来系统研究压铸工艺参数对A356铝合金半固态压铸件性能的影响,以优化半固态压铸工艺及其参数。
2.
In this paper, the relationship between the gate shape and the filling procedure of complex cavity during semi-solid die casting has been simulated in detail by modified finite element software of ANSYS.
使用二次开发的ANSYS有限元软件,对铝合金半固态压铸复杂件的充型过程与模具内浇道形貌之间关系进行详细的计算机仿真。
3.
The microstructure and mechanical properties of the products made of A380 aluminum alloy by two different forming methods(semi-solid die casting and liquid die casting) are studied under state of casting and T6 heat-treatment.
对A380铝合金液态与半固态压铸成形件在压铸态和T6热处理态下的力学性能与微观组织进行了研究。
3) semi solid die casting
半固态压铸
1.
The results show that the mechanical properties of semi solid die castings of aluminum alloy are superior to that of the liquid die castings.
对AlSi7Mg合金 (A356)半固态压铸件和液态压铸件进行了不同工艺的固溶与时效热处理 ,分析了其显微组织与疏松度 ,测定了硬度、拉伸强度及延伸率等力学性能。
2.
The preparation of semi solid slurry materials, forming technology of semi solid die casting and numerical simulation of forming process which are very important aspects of semi solid die casting forming technology of aluminum alloys,were reviewed, and existent problems and development directions about this technology were also pointed out.
综述了铝合金半固态压铸成形技术在半固态坯料制备、半固态压铸成形工艺及成形过程数值模拟等方面的研究进展,指出了该技术目前在研究中还存在的问题,并对今后的发展方向进行了展望。
4) semi-solid die-casting
半固态压铸
1.
Structural evolutions of ZL112Y alloy in procedures of semi-solid die-casting;
ZL112Y铝合金半固态压铸过程微观组织的演变
5) semi-solid squeeze casting
半固态挤压铸造
1.
The principle and processing characteristics of semi-solid squeeze casting were introduced briefly;the influencing rules of semi-solid squeeze casting process parameters on properties of components were analyzed detailedly;the potential defects in components were generalized and analyzed;the corresponding preventive measures were presented also.
简要介绍了半固态挤压铸造原理与工艺特点;着重分析了半固态挤压铸造工艺参数对制件性能的影响规律;最后对制件可能出现的缺陷进行了归纳分析并提出了相应的预防措施。
补充资料：触
【触】
（术语）梵语萨婆罗奢Spars/a，五境之一，身根所触有坚湿暖动等十一种。俱舍论一曰：“触者有十一：谓四大种、滑性、涩性、重性、轻性、及冷、饥、渴。”【又】心所法之一。俱舍之十大地法，唯识之五遍行摄之。彼属于五境者，为所触之色法，而此为能触之心法也。使根境识三者和合之心作用也。俱舍论四曰：“触者，谓根境识和合生，能有触对。”大乘义章二曰：“令根尘识和合名触。”十二支中之触支是也。【又】不净为触。增韵曰：“触污也。”盖触于不净物而自为不净者，是云触秽。
（术语）梵语萨婆罗奢Spars/a，五境之一，身根所触有坚湿暖动等十一种。俱舍论一曰：“触者有十一：谓四大种、滑性、涩性、重性、轻性、及冷、饥、渴。”【又】心所法之一。俱舍之十大地法，唯识之五遍行摄之。彼属于五境者，为所触之色法，而此为能触之心法也。使根境识三者和合之心作用也。俱舍论四曰：“触者，谓根境识和合生，能有触对。”大乘义章二曰：“令根尘识和合名触。”十二支中之触支是也。【又】不净为触。增韵曰：“触污也。”盖触于不净物而自为不净者，是云触秽。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条