说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 波形弹簧
1)  wave spring
波形弹簧
1.
The paper expounds the method of design about wave spring curved surface,the processing NC program and its technological processing course.
阐述了波形弹簧成形模曲面的确定及其数控加工程序的编制方法、加工工艺过程 。
2.
The paper indroduces the structure of wave spring and the way of obtaining wave shape,and describes a shaping process for wave spring of caryiny on both pressurizing and heat treatment,through the experiment of the heat treatment of material timely.
简要介绍了波形弹簧的结构及波形的获得方法 ,通过冷压成形及材料时效热处理实验 ,提出了一种加压与热处理同时进行的波形弹簧成形工艺 。
3.
Applying ritz inethoods,this paper works out the nonlinear relationship between the load andthe deformation of wave springs.
应用Ritz法导出了波形弹簧载荷与变形之间的非线性关系,在推导过程中同时考虑到弹簧用向曲率、波形曲率和附加弯曲的影响,经过实验验证在弹簧正常工作范围内本计算模型可靠。
2)  wave-shaped spring
波形弹簧
1.
Improvement of heat treatment process for 65Mn steel wave-shaped spring
65Mn钢波形弹簧的热处理工艺
2.
In this paper,the shape design of wave-shaped spring and its manufacturing technologyis discussed.
本文主要探讨了波形弹簧的结构设计及制造工艺的确定。
3)  wave single coil spring lock washer,wave spring washer
波形弹簧垫圈
4)  Special-shape Spring
异形弹簧
1.
3D Solid Modeling of Special-shape Spring for CNC Coiling;
面向数控加工的复杂异形弹簧三维建模
2.
When producing special-shape spring in CNC spring coiler,the setup of the coiler is often a manual work using a trial-and-error method.
在数控卷簧机上卷绕异形弹簧时,从刀具、凸轮的选择和布局到程序的编制均需手工进行,导致加工效率低,而且一般人员难以熟练掌握卷簧方法。
3.
The solid modeling of a complicated special-shape spring is difficult because of its complex spatial shape.
对复杂异形弹簧的实体造型技术进行了研究,着重阐述了弹簧实体表面的三维离散技术,提出了一种针对螺旋体与异形弹簧末端连接部分进行光滑处理的方法,避免了实体造型时出现缝隙,并在C++Bu ilder环境下,以OpenGL为工具,实现了异形弹簧的造型和显示。
5)  belleville spring
碟形弹簧
1.
Over the structure and process analysis to car-used ABS shell, using belleville spring to do four sides core-drawing to the products within the cylinder surface, the mold structure is simple and close, stable and reliable proved by production, the effect is remarkable, and it can be referenced by similar injection mold products.
通过对汽车ABS壳体的结构和工艺性分析,采用碟形弹簧,对产品进行圆周内四面抽芯,使模具结构简单紧凑,经生产验证,模具结构稳定可靠,效果显著,对类似产品的注射模有较好的参考价值。
6)  disc spring
碟形弹簧
1.
Research and manufacture of pneumatic control disc spring safety valve;
气控碟形弹簧式安全阀的研制
2.
The deign and machining of the key components of this shock absorber is introduced,including the surface treatment of the spline mandrel,the design of disc spring and connecting housing,and the configuration of sealing and bearing.
介绍了该空气机械减震器关键零部件的设计,包括花键心轴的表面处理技术、联接筒体设计、减震源碟形弹簧组合设计、密封及支承设计。
3.
Based on the analysis of the pressing technology of disc springs, the CAD system method for the dies and moulds with disc springs was developed on the AutoCAD R14 platform by using Visual C+ +6.
在分析碟形弹簧冲压工艺的基础上 ,利用VisualC+ + 6。
补充资料:标准操作冲击电压波形(见冲击电压发生器)


标准操作冲击电压波形(见冲击电压发生器)
standard switching impulse voltage waveform

  b .oozhun CooZuo ChongJld,onyo boxlng标准操作冲击电压波形(standard switchingimpulse voltage waveform)见冲击电压发生器。
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条