说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 轧后余热热处理
1)  heat treating with the residual heat after hot rolling
轧后余热热处理
1.
The result showed that mechanical properties of the bar was increased by heat treating with the residual heat after hot rolling,and could be satisfied with the requirements of standard YB13 - 69.
对16Mn钢筋轧后余热热处理工艺进行了试验,结果表明,经轧后余热热处理的钢筋,其力学性能得以提高,可满足YB13—69标准的要求。
2)  remained heat treatment after rolling
轧后余热处理
1.
Through making technological condition and process flow,Laiwu steel developed BS 460B Φ50 mm concrete reinforcement steel by VN micro-alloying and remained heat treatment after rolling.
莱钢通过制定试制产品的技术条件和工艺流程,采用VN微合金化技术和轧后余热处理两种工艺,开发出了英标460BΦ50 mm钢筋混凝土用钢筋。
3)  steel bars of remained heat treatment after rolling
轧后余热处理钢筋
1.
Comparison of seismic behavior of steel bars of remained heat treatment after rolling and normal rolling
轧后余热处理钢筋与常规轧制钢筋抗震性能对比
4)  heat treatment with residual rolling temperature
余热热处理
1.
The results indicted that the better resistance to impact fracture for the test grinding balls could be obtained by making use of a given heat treatment with residual rolling temperature.
结果表明 ,该球经适当的轧后余热热处理可获得较高的抗多冲击破坏能
2.
The abrasiveness of cross rolled low chromium white cast iron grinding ball has been studiedthroug the test of abrasion,and the characters of abrasion surface was analyzed,The results show that the better vesistance to abrasion for the test grinding balls could be obtained by Making use of a given heat treatment with residual rolling temperature.
结果表明 :斜轧低铬白口铸铁磨球经适当的余热热处理可获得较高的耐磨性
5)  residual heat treatment
余热处理
1.
The qualified reinforced bar is produced by designing chemical composition and developing QTB residual heat treatment process.
介绍了英标460B钢筋的研制情况,通过成分设计和开发QTB余热处理工艺生产出合格的钢筋。
2.
In order to resolve the pr oblem of ribbed bar rust after rol ling,the technology of residual heat treatment was applied,which realized by water cooling after rolling The mechanis m of the technology,the obvious ef fects and benefits were introduce
莱芜钢铁集团公司为解决带肋钢筋轧后锈蚀问题对其进行余热处理 ,通过轧后穿水实施在线高温阻锈技术。
6)  remained heat treatment
余热处理
1.
Finite element simulation for the remained heat treatment of large gauge ribbed bar;
大规格带肋钢筋余热处理过程的有限元模拟
2.
The results show that BS 460MPa grade reinforced bar can be produced all from Q235 or 20MnSi billet by the remained heat treatment process but the production cost of the former is lower.
以Q235、20MnSi钢坯为原料进行了用余热处理工艺生产英标460MPa级钢筋的试验,研究了水冷段数、水压、上冷床温度以及成分、钢种和时效对钢筋性能的影响。
补充资料:金属热处理:真空热处理
      将金属工件在 1个大气压以下(即负压下)加热的金属热处理工艺。20世纪20年代末﹐随著电真空技术的发展﹐出现了真空热处理工艺﹐当时还仅用於退火和脱气。由於设备的限制﹐这种工艺较长时间未能获得大的进展。60~70年代﹐陆续研製成功气冷式真空热处理炉﹑冷壁真空油淬炉和真空加热高压气淬炉等﹐使真空热处理工艺得到了新的发展。在真空中进行渗碳﹐在真空中等离子场的作用下进行渗碳﹑渗氮或渗其他元素的技术进展﹐又使真空热处理进一步扩大了应用范围。
         特点 金属零件在真空中的热处理能防止氧化脱碳并具有脱气效应﹐但金属元素可能蒸发。
         防止氧化脱碳 真空热处理炉的加热室在工作时处於接近真空状态﹐仅存在微量一氧化碳和氢气等﹐它们对於加热的金属是还原性的﹐不发生氧化脱碳的反应﹔同时还能使已形成的氧化膜还原﹐因此加热后的金属工件表面可以保持原来的金属光泽和良好的表面性能。
         脱气效应 金属零件在真空环境中加热时﹐金属中的有害气体﹐例如鈦合金中的氢和氧﹐会在高温下逸出﹐有利於提高金属的机械性能。
         金属元素蒸发 各种元素都有自身的蒸气压﹐如果环境中的压力低於某种元素的蒸气压﹐这种元素就会蒸发。在真空热处理时﹐应根据钢中所含合金元素的蒸气压来选择加热时的真空度或温度﹐以避免合金元素蒸发。
         工艺 真空热处理可用於退火﹑脱气﹑固溶热处理﹑淬火﹑回火和沉淀硬化等工艺。在通入适当介质后﹐也可用於化学热处理。
         真空中的退火﹑脱气﹑固溶处理主要用於纯净程度或表面质量要求高的工件﹐如难熔金属的软化和去应力﹑不锈钢和镍基合金的固溶处理﹑鈦和鈦合金的脱气处理﹑软磁合金改善导磁率和矫顽力的退火﹐以及要求光亮的碳钢﹑低合金钢和铜等的光亮退火。真空中的淬火有气淬和液淬两种。气淬即将工件在真空加热后向冷却室中充以高纯度中性气体(如氮)进行冷却。适用於气淬的有高速钢和高碳高铬钢等马氏体临界冷却速度较低的材料。液淬是将工件在加热室中加热后﹐移至冷却室中充入高纯氮气并立即送入淬火油槽﹐快速冷却。如果需要高的表面质量﹐工件真空淬火和固溶热处理后的回火和沉淀硬化仍应在真空炉中进行。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条