说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 陶瓷复合钢管
1)  composite pipe
陶瓷复合钢管
1.
The experiment results show that the higher temperature by adding CrO 3 can improve the composite pipe's properties.
利用离心自蔓延高温合成法 ,制备陶瓷复合钢管
2.
The effects of SiO 2 and CrO 3 on the relative density and microhardness were studied, meanwhile the compressive and shear strength of a series of composite pipes containing different volume additives were compared.
采用重力分离自蔓延高温合成技术,制备了陶瓷内衬复合钢管,研究了添加CrO3和SiO2对陶瓷复合钢管的压溃强度、压剪强度、陶瓷层相对密度、显微硬度的影响。
2)  ceramic-lined steel composite pipe
陶瓷内衬复合钢管
1.
Activated carbon powder and alloy powder is added into the thermite at the time of preparing CLSP(ceramic-lined steel composite pipe).
在制备陶瓷内衬复合钢管时 ,在铝热剂中加入活性碳粉、合金粉末 ,使原来纯铁过渡层成为钢过渡层 ,硬度大幅度提高 ,从而使钢管抗压强度明显提高。
2.
The theory of analysis of reinforced concrete beam is applied to the study of ceramic-lined steel composite pipe.
将“钢筋砼梁”的分析原理应用于陶瓷内衬复合钢管的分析,得到的复合钢管径向压溃强度的计算公式不仅体现了材料几何尺寸的效应,而且反映出材料性能的影响:进一步分析表明,陶瓷衬层的弹性模量越高,复合钢管径向压溃强度就越高,这为材料结构设计提供了有价值的参考。
3)  Composite Pipe of Metal-Ceramic
金属-陶瓷复合钢管
4)  ceramic composite piping
陶瓷复合管
1.
The temperature distribution and variation in the cooling course of the ceramic composite piping prepared by centrifugal-SHS were modeled and analyzed so as to provide the basis of the choice of process parameter and interface structure analysis of the piping.
模拟分析了SHS-离心法制备陶瓷复合管道在冷却凝固过程中的温度分布和变化,从而为工艺参数的选择和管道界面结构分析提供了基础。
5)  ceramic-lined composite pipes
陶瓷内衬复合管
1.
Influences of pre-coating technique on interface of ceramic-lined composite pipes fabricated by the SHS process;
预涂覆工艺对SHS陶瓷内衬复合管界面的影响
2.
Influences of metallic additive on microstructures and interface-bonding of ceramic-lined composite pipes fabricated by the SHS process;
金属添加剂对SHS陶瓷内衬复合管微观结构与界面连接的影响
3.
On the basis of using gravitational separation SHS process to produce ceramic-lined composite pipes, the influence of Ni content on combustion characteristics and mechanical properties is investigated.
采用SHS重力分离技术制备陶瓷内衬复合管,通过改变主燃烧配系组元Ni的含量,研究分析了金属Ni对陶瓷内衬复合管制备的燃烧特性及机械性能的影响。
6)  Ceramic-lined compound pipe
复合陶瓷内衬管
补充资料:宝鸡石油钢管厂大口径薄壁钢管的φ508排辊成形机组


宝鸡石油钢管厂大口径薄壁钢管的φ508排辊成形机组


  宝鸡石油钢管厂大口径薄壁钢管的中508排辊成形机组
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条