1) GJM Type Machine
GJM粉磨机
2) machine for grinding and paste
磨粉磨浆机
3) roller mill
磨粉机
1.
Maintenance and protection of roller mill;
辊式磨粉机的维护和保养
2.
Set feeding trajectory and infeeding speed as multiple target functions and take horizontal distance and vertical distance between feeding roller and fast roller, rotational speed and diameter of feeding roller and inclined angle between the fast roller and slow roller as design parameters, Particle Swarm algorithms and MATLAB were used in the optimization design of roller mill.
采用粒子群算法和Matlab语言,以磨粉机的分流辊与快辊的水平距离及垂直距离、分流辊的转速及直径、快慢辊的斜置角度作为设计变量,以物料的喂料轨迹和物料的入磨速度作为多目标函数进行优化设计。
3.
Detailed analysis is made for the feeding non-uniformity phenomena frequently occurred in the feeding system of a break roller mill, and specific settlement methods for them are set forth.
对磨粉机皮磨系统经常出现的几种喂料不匀现象作了详细的分析 ,并提出了具体解决方法。
4) grinding machine
磨粉机
1.
It analyses the working operation of the high-speed grinding machine and the influence of the parameters.
论述了采用高速旋转的超硬轮对物料进行磨损剥离制粉过程，分析了高速砂轮磨粉机工作原理和各参数的影响，为今后进一步研制和开发系列新型高速砂轮磨粉机提供了有用的依据。
2.
With the adoption of pulverization principle of shearing,DG series of double-refiner discs grinding machines were developed.
采用剪切式粉碎原理,开发了DG系列双盘式磨粉机。
3.
With the adoption of pulverization principle of shearing, DG-350 double-refiner disc special type grinding machine is developed to satisfy the requirements of special powder preparation.
为满足特种粉体制备的需要,采用剪切式粉碎原理,研制出DG-35型双磨盘式特种磨粉机。
5) mechanical grinding
机械粉磨
1.
Effect of mechanical grinding on particle size distribution and strength of coal gangue-cement system;
机械粉磨对煤矸石-水泥体系颗粒群特征及力学性能的影响
2.
To study the effect of mechanical grinding on particle size distribution and strength of coal gangue-cement system different mechanical grinding schemes were adopted including: coal gangue ground independently to replace cement, coal gangue and cement mixed first then ground and coal gangue and cement ground independently then mixed ( the ratio between coal gangue and cement keeps 30 to 70).
采用了煤矸石单独粉磨后取代水泥、煤矸石与水泥混合后共同粉磨(先混后磨)、煤矸石与水泥分别单独粉磨后混合(先磨后混)(三者均按w(煤矸石):w(水泥)=30:70的比例)3种不同的机械粉磨方式研究粉磨对煤矸石-水泥体系的颗粒群特征以及力学性能的影响。
6) rollermill
磨粉机
1.
The researches on rollermill' s power,grinding force and roll pressure;
磨粉机功率、研磨力和辊间压力的研究
2.
The height parameters of the micro salience profile on the roughened surface of smooth rolls were discussed, and the surface roughness of the smooth rolls of rollermills MDDL100 and MDDK100, the newly applied products from Bühler, were tested, with an approach to the relationship between the values R a and Rz of the dull surfaces of the smooth rolls.
阐述了心磨光辊粗糙度的高度参数 ,并对新投产的引进瑞士布勒公司的MDDL和MDDK型磨粉机的光辊表面粗糙度进行了测试 ,探索了光辊无泽面粗糙度Ra 值与Rz 值的相互关系。
3.
Several methods for extending the service life of tooth-wedge belts are discussed in the light of the application of such belts in the driving systems of rollermills, their design, manufacturing, routine adjustment and maintenance.
就齿楔带在磨粉机传动系统的应用 ,从设计、制造到日常的调整、维护 ,详细论述了延长齿楔带使用寿命的几个方法。
补充资料：细粉磨机
分子式：
CAS号：
性质：一种将物料磨成细度在31目/cm2以下的精细粉末的微粉磨机。该机由一个大内磨轮和若干个小磨轮组成，小磨轮以高速沿大磨轮内圆周面转动，依靠其离心作用所引起的高压将位于大小磨轮之间的物料磨碎，然后用气流将磨碎的粉末输送到旋风分离器进行分离和捕集。
CAS号：
性质：一种将物料磨成细度在31目/cm2以下的精细粉末的微粉磨机。该机由一个大内磨轮和若干个小磨轮组成，小磨轮以高速沿大磨轮内圆周面转动，依靠其离心作用所引起的高压将位于大小磨轮之间的物料磨碎，然后用气流将磨碎的粉末输送到旋风分离器进行分离和捕集。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条