1) R PVC
R-PVC
2) R-PVC sheet
R-PVC片材
1.
The features of the extrusion die structure were introduced, which extrude with R-PVC sheet.
介绍了R-PVC片材采用衣架式挤出成型的机头结构特征,阐述了材料选择、流道分析、加工要点和装卸、维护方面的技术问题,并提出了解决方法。
3) extruding R-PVC
挤出R-PVC
4) R-PVC
硬质聚氯乙烯(R-PVC)
5) polyvinyl chloride
PVC
1.
Application of high - purity hydrogen chloride-byproduct from potassium sulfate production in polyvinyl chloride production;
K_2SO_4装置副产高纯度HCl在PVC生产中的应用
2.
The effect of CaCO3 nanoparticle and acrylic rubber content on the mechanical properties of polyvinyl chloride(PVC) was studied.
研究了纳米碳酸钙和丙烯酸酯橡胶(ACR)二元增韧聚氯乙烯(PVC)材料,主要考察了丙烯酸酯橡胶以及纳米碳酸钙用量对PVC力学性能的影响,并采用扫描电镜、透射电镜对复合材料的结构进行了观察。
3.
Sealing strip using in automobile door or window was produced by using the polyvinyl chloride(PVC) elastomerics of high polymerization degree as host resin which was modified by blending with nitrile-butadiene rubber(NBR).
以高聚合度PVC弹性体为主体树脂,用丁腈橡胶进行共混改性制备了汽车门窗密封条;对试样进行了硬度、拉伸强度、断裂伸长率、热老化等性能试验;对老化后的试样表面进行了SEM表征。
6) Poly(vinyl chloride)
PVC
1.
Study on Properties and Preparation of Ultrafiltration Membrane from Polyurethane/Poly(vinyl chloride) Blends;
PU/PVC共混超滤膜的制备及性能
2.
Poly(vinyl chloride) was aminated by ethanolamine in DMF and aminated polymers with different content of nitrogen were made under the optimum reaction conditions : the reaction temperature 80℃, molar rate of amine to poly(vinyl chloride) 11, the reaction time within 36h ,and the reaction pressure 2.
确定了最佳反应条件:温度80℃,PVC结构单元与乙醇胺的摩尔比1/1,反应时间小于36 h,反应压力2。
3.
The comprehensive information in both gas phase and condensed phase can be acquired by using cone calorimeter which was used to investigate the synergistic effect of Cu 2O and MoO 3 on flame retardance and smoke suppression of poly(vinyl chloride)(PVC) in this paper.
用锥形量热仪 (CONE)研究Cu2 O/MoO3 体系对PVC的阻燃和抑烟协同效应可以同时获得气相和凝聚相的综合信息。
补充资料：acrylic chlorinated PVC exterior enamel
分子式：
CAS号：
性质：由过氯乙烯树脂、丙烯酸树脂、增塑剂及各种颜料、助剂制得的适合外用的磁漆，该漆具有干燥快，不易粉化开裂，能打磨，保色性、耐候性、耐化学腐蚀性都好的特点。主要用于涂饰各种车辆、大中型设备、机床及桥梁等。
CAS号：
性质：由过氯乙烯树脂、丙烯酸树脂、增塑剂及各种颜料、助剂制得的适合外用的磁漆，该漆具有干燥快，不易粉化开裂，能打磨，保色性、耐候性、耐化学腐蚀性都好的特点。主要用于涂饰各种车辆、大中型设备、机床及桥梁等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条