说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 网状面板蜂窝夹层结构
1)  honeycomb sandwich panels with mesh plates
网状面板蜂窝夹层结构
1.
The effect factors of thermal expansion of honeycomb sandwich panels with mesh plates have been analyzed and the main factor to reduce the thermal expansion of honeycomb sandwich panels with mesh plates at low temperature has been found.
给出了网状面板蜂窝夹层结构的低温热膨胀测试结果, 对两个方向的热膨胀系数进行了比较, 分析讨论了网状面板蜂窝夹层结构热膨胀的影响因素, 找出了减小热膨胀系数的主要环节。
2)  Aluminium honeycomb sandwich structure panel
铝蜂窝夹层结构板
3)  high-rise building of alveolate frame
高层蜂窝状网格结构
4)  honeycomb sandwich structure
蜂窝夹层结构
1.
Experimental study of the cocure process with the vacuum bag method for honeycomb sandwich structure;
蜂窝夹层结构真空袋共固化工艺过程实验研究
2.
Core crush of Nomex honeycomb sandwich structure during cocuring process with vacuum bag
Nomex蜂窝夹层结构真空袋共固化过程蜂窝变形
3.
The mechanical properties and process properties of SY-24B film adhesive using for bonding facing to core of honeycomb sandwich structure were presented in this paper, the mechanical properties of a two part paste adhesive SY-21 were also discussed for comparing.
介绍了蜂窝夹层结构用面板胶SY -2 4B胶膜的力学性及工艺性能 ,并将其与双组分糊状胶SY -2 1作对比。
5)  Nomex honeycomb sandwich construction
Nomex蜂窝夹层结构
1.
Through testing the mechanical properties of the Nomex honeycomb sandwich construction with different curing pressure, the effect of the curing pressure on the performance of sandwich constructions has been discussed.
通过测试不同固化压力下的Nomex蜂窝夹层结构的力学性能,讨论了固化压力对蜂窝夹层结构性能的影响。
6)  Honeycomb sandwich
蜂窝夹层结构
1.
ffect of resin system,resin content of prepreg and the composition of woven fabric on roll pell strength of honeycomb sandwich panel,which requires direct co-curing between prepreg and honeycomb,has been investigated in this paper.
对预浸料与蜂窝直接接触共固化成形的蜂窝夹层结构的滚筒剥离强度进行了研究,主要讨论了树脂基体、预浸料树脂含量及织物构成对滚筒剥离强度的影响。
2.
Honeycomb sandwich has become an important material in designing radomes instruction.
蜂窝夹层结构已成为雷达罩结构设计中广泛应用的重要材料。
3.
In this paper the repair of damaged honeycomb sandwich radome was studied.
本文研究了蜂窝夹层结构雷达天线罩损伤的修补。
补充资料:蜂窝夹层结构
分子式:
CAS号:

性质:由面板(蒙皮)与轻质蜂窝芯材通过胶黏剂粘接成的层状复合结构。夹层结构面板可以是铝板或者碳纤维、玻璃纤维、芳纶纤维复合材料板。常用的蜂窝芯材料为铝箔、芳纶纸、玻璃布和牛皮纸等。夹层结构的突出特点是:弯曲刚度大,可充分利用材料的强度,重量轻。蜂窝夹层结构可以一次成型即上下面板的成型固化和面板与蜂窝芯的胶接固化是同时完成的;也可以二次成型即上下面板的成型固化与面板芯材的胶接固化先后分两次固化;也可以三次成型,则是上面板固化、下面板固化和面板芯材胶接固化,先后分三次进行。铝板作面板时需要在胶接之前进行表面处理,以提高胶接强度。夹层结构在飞机上应用比较广泛,如翼面、舵面、舱面、壁、地板、雷达罩等,还可以用作火车、地铁、汽车上的各种隔板,用玻璃纤维复合材料或芳纶复合材料为蒙皮以铝蜂窝芯、芳纶纸蜂窝芯制造的赛艇、游船性能优异,另外在滑水板、冲浪板、滑雪板等体育用品方面也得到应用。厚型的粗蜂窝夹层结构可用作建筑墙板,隔音、隔热效果好。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条