1)  low alloyed cast iron
低合金蠕铁
2)  low-alloy steel
低合金钢
1.
Acicular ferrite microstructure of weld metal for low-alloy steel;
低合金钢焊缝的针状铁素体微观组织
2.
Study on accounting model of austenite grain size in low-alloy steel weld metal;
低合金钢焊缝金属中奥氏体晶粒尺寸计算模型的研究
3.
Prediction of PF volume fraction in low-alloy steel welding seam;
低合金钢焊缝中先共析铁素体组织数量的控制
3)  low-alloy
低合金
1.
The development of hot-rolled high-strength low-alloy H-beam in Laigang was summarized.
对莱钢生产的热轧低合金高强H型钢进行了总结,论述了该类H型钢的生产工艺和化学成分优化设计思路。
2.
The jaw made of the Re low-alloy air-quenched wear-resistant cast steel was developed with the characteristics of simple process, lower cost and good mechanical properties.
新型稀土低合金空淬耐磨铸钢腭板,具有生产工艺简单、成本低、性能优良等特点。
3.
A new low-alloy wear-resistant cast steel is introduced in the paper.
一种新型低合金耐磨铸钢经空淬处理,获得下贝氏体和马氏体组织,综合机械性能优越。
4)  low alloy steels
低合金钢
1.
Improving on dissolving sample method for nickel in low alloy steels;
低合金钢中镍的溶样方法改进
2.
CAD of transformation curves for supercooled austenite in low alloy steels;
低合金钢过冷奥氏体转变曲线CAD
3.
The primary importance for the company should be attached to the development of low alloy steels by utilizing the resources advantages.
概述了攀钢低合金钢及微合金钢开发与生产的思路、状况及进一步发展的设想。
5)  low alloy steel
低合金钢
1.
Analysis of Mn,Mo,V,Ni,Al,Cu,Cr in low alloy steel by ICP-AES;
ICP-AES分析低合金钢中的Mn、Mo、V、Ni、Al、Cu、Cr元素
2.
Analysis and study on central crack in continuously rolled billets of low alloy steel;
低合金钢连轧方坯中心裂纹的分析与研究
3.
Research on low alloy steel part prepared by powder injection molding;
注射成形低合金钢支持块零件的研究
6)  microalloy
低合金化
1.
Using a process of combination of microalloying with Si,Mn and other elements and founding with metal-mold as well as controlled cooling heat-treatment, a bainite/martensite(B/M) dual-phase grey cast iron as a substitute for common wear resistant cast iron was fabricated.
提出了用硅锰等元素低合金化、金属型浇注后采用特殊热处理工艺获得贝氏体/马氏体(B/M)复相组织的耐磨灰铸铁的方法,并利用光学显微镜、透射电镜、扫描电镜等检测手段对热处理前后各组织形态进行分析。
参考词条
补充资料:钨铁电炉出铁(吉林铁合金厂)


钨铁电炉出铁(吉林铁合金厂)


  吻 他排由帕中桩了士朴屏人乙曰“
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。