1)  Spreadability
涂抹性能
2)  smear
涂抹
1.
Application of well resistance and smear effect in foundation design using prefabricated drains;
井阻和涂抹作用在排水板地基设计中的应用
2.
The rigorous solutions are derived for the consolidation problems of soils with drain wells through soft clay layer by use of the Merchant model under both free strain and equal strain conditions and in consideration of the effects of both well resistance and smear action.
本文基于Merchant模型分别推导了自由应变条件和等应变条件下打穿软粘土层的竖向排水井地基粘弹性固结问题解析解,同时考虑了井阻和涂抹作用的影响。
3)  spread
涂抹食品
1.
The rich Vitamin E content spread is prepared from wheat-germ oil.
本文介绍了以小麦胚芽油为原料,生产高VE含量涂抹食品的工艺、配方,及理化、卫生指标。
4)  spreadability
涂抹性
1.
This paper gave the formulation through sensory evaluation and spreadability and compared the effect of skim milk powder,soybean protein isolate,whey powder and butter on texture by TPA.
通过单因素实验,通过感官评定和涂抹性指标确定了涂抹型再制干酪的基本配方,并应用质地剖面分析(TPA)研究了脱脂乳粉、大豆分离蛋白、乳清粉和无水黄油对涂抹型再制干酪质地的影响。
5)  shale smear
泥岩涂抹
1.
A quantitative evaluation of the fault sealing of Chenbao area in Gaoyou sag is made by applying synthetic fuzzy judgment integrated with shale smear factor method.
运用模糊综合评判方法,并结合泥岩涂抹系数法对高邮凹陷陈堡地区的断层封闭性进行了定量评价,分析结果与实际勘探状况相吻合。
6)  smearing
涂抹作用
1.
According to sealing mechanism of strata joining and mudstone smearing, fault sealing ability has been quantitatively projected through computer method.
根据地层对接和泥岩涂抹两种封闭机理,应用计算机手段开展了断层封闭性的定量预测,并结合地质条件,分析了涂抹作用对断层封闭性的影响程度。
2.
The general element was improved in which both the effects of smearing and well resistance were taken into account inside the composite sand-wall element, therefore the drawback of the huge amount of element number and node number adopted in the general finite element analysis is overcame.
该单元对常规等参元进行改进,在单元内部同时考虑砂井的涂抹作用和井阻作用,从而克服了常规有限元法在计算砂井地基时单元数和节点数过多的缺点。
参考词条
补充资料:不锈钢的物理性能、力学性能和耐热性能
不锈钢的物理性能


不锈钢和碳钢的物理性能数据对比,碳钢的密度略高于铁素体和马氏体型不锈钢,而略低于奥氏体型不锈钢;电阻率按碳钢、铁素体型、马氏体型和奥氏体型不锈钢排序递增;线膨胀系数大小的排序也类似,奥氏体型不锈钢最高而碳钢最小;碳钢、铁素体型和马氏体型不锈钢有磁性,奥氏体型不锈钢无磁性,但其冷加工硬化生成成氏体相变时将会产生磁性,可用热处理方法来消除这种马氏体组织而恢复其无磁性。

奥氏体型不锈钢与碳钢相比,具有下列特点:

1)高的电阴率,约为碳钢的5倍。

2)大的线膨胀系数,比碳钢大40%,并随着温度的升高,线膨胀系数的数值也相应地提高。

3)低的热导率,约为碳钢的1/3。

不锈钢的力学性

不论不锈钢板还是耐热钢板,奥氏体型的钢板的综合性能最好,既有足够的强度,又有极好的塑性同时硬度也不高,这也是它们被广泛采用的原因之一。奥氏体型不锈钢同绝大多数的其它金属材料相似,其抗拉强度、屈服强度和硬度,随着温度的降低而提高;塑性则随着温度降低而减小。其抗拉强度在温度15~80°C范围内增长是较为均匀的。更重要的是:随着温度的降低,其冲击韧度减少缓慢,并不存在脆性转变温度。所以不锈钢在低温时能保持足够的塑性和韧性。

不锈钢的耐热性能

耐热性能是指高温下,既有抗氧化或耐气体介质腐蚀的性能即热稳定性,同时在高温时双有足够的强度即热强性。

不锈钢国际标准标准

标准 标准名


GB 中华人民共和国国家标准(国家技术监督局)

KS 韩国工业标准协会规格Korean Standard

AISI 美国钢铁协会规格America Iron and Steel Institute

SAE 美国汽车技术者协会规格Society of Automative Engineers

ASTM 美国材料试验协会规格American Society for Testing and Material

AWS 美国焊接协会规格American Welding Society

ASME 美国机械技术者协会规格American Society of Mechanical Engineers

BS 英国标准规格British Standard

DIN 德国标准规格Deutsch Industria Normen

CAS 加拿大标准规格Canadian Standard Associatoin

API 美国石油协会规格American Petroleum Association

KR 韩国船舶协会规格Korean Resister of Shipping

NK 日本省事协会规格Hihon Kanji Koki

LR 英国船舶协会规格Llouds Register of Shipping
说明:补充资料仅用于学习参考,请勿用于其它任何用途。