说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 低熔融指数
1)  low-grade number
低熔融指数
1.
In this paper,the spinning technology of low-grade number and pp-powder to spinning high-strength of pp-coloured fiber were studied.
研究了聚丙烯粉料在低熔融指数( MI) 下防制高强丙纶色丝的生产工艺。
2)  melt index
熔融指数
1.
Soft sensor method for polypropylene melt index based on FP-EFCM
基于机制建模与模糊建模相结合的聚丙烯熔融指数软测量方法
2.
The prediction of the melt index and ethylene content for polypropylene (PP) was investigated, and both of them are the key quality index of PP production.
针对Spheripol工艺,根据Z-N催化剂聚合机理,对不同牌号聚丙烯产品(包括均聚聚丙烯、无规共聚聚丙烯和抗冲聚丙烯)分别建立了熔融指数和乙烯质量分率的预测模型。
3.
The melt index (MI) ofpolypropylene (PP) has significant effects on the impregnation and interface forming process in GMT making.
聚丙烯的熔融指数对GMT的浸渍过程及界面形成过程有着重要的影响。
3)  melt flow index
熔融指数
1.
In this paper, the melt flow indexes of six brands of high density polyethylene (HDPE) were measured by a full-load melt flow measuring instrument.
本文采用全负荷熔体流动速率测试仪测定六种牌号高密度聚乙烯(HDPE)的熔融指数,并参照高分子流变学的研究方法,初步尝试由所加载荷及熔融指数经过数据换算和处理,得到表征熔体流变性的三个重要参数:剪切应力、剪切速率和表观粘度。
2.
The density and melt flow index of the composites with different carbon black content were measured.
利用旋转流变仪对复合材料的流变特性进行了考察,对不同炭黑含量的复合材料进行了密度和熔融指数测试。
4)  MI [mi:]
熔融指数
5)  melting index
熔融指数
1.
Polypropylene chip with melting index 3, relative molecular weight close to 300000 and distribution index less than 7 was selected to produce PP filament on imported equipment by one step high speed spinning process.
采用熔融指数为3,分布指数小于7,相对分子质量近30万的聚丙烯切片在进口设备上一步法高速纺生产中旦丙纶长丝。
6)  polypropylene with low melt index
低熔融指数聚丙烯
1.
Donor DCPMS preparing polypropylene with low melt index;
DCPMS作为外给电子体生产低熔融指数聚丙烯
2.
The test procedure and result of production of polypropylene with low melt index are summarized.
总结了开发生产低熔融指数聚丙烯的试验过程与结果 ,通过优选催化剂、优化操作过程、控制加氢量 ,生产出质量稳定可靠的熔融指数在 0 。
补充资料:熔融指数
分子式:
CAS号:

性质:又称熔融指数。在一定温度下,熔融状态的高聚物在一定负荷下,10min内从规定直径和长度的标准毛细管中流出的质量(g)。是聚合物熔体黏度的一个参数,由于它与分子量有关,因而也是表征聚合物分子量的一个参数。熔融指数愈大,则流动性愈好。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条