说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 直接插补加工法
1)  direct-interpolate maching method
直接插补加工法
2)  direct interpolation
直接插补
1.
A direct interpolation algorithm of spiral bevel gear NC machining is proposed,thus establishing the relationship between the motion of the cutter-head center and the rotation of the work gear.
提出了弧齿锥齿轮数控加工的直接插补算法,确定了铣齿刀盘中心运动和工件齿轮旋转运动之间的关系。
2.
A direct interpolation algorithm for spatial curves on a surface is proposed for pen-cutting of sculptured surfaces.
针对复杂曲面笔式加工时位于曲面上的空间曲线型刀具轨迹,给出一种直接插补算法。
3.
The algorithm of generating motion and direct interpolation for gear's five axial numerical control machining is proposed.
给出了螺旋锥齿轮五坐标NC展成加工运动和直接插补算法 。
3)  interpolating-process
插补加工
4)  circle offsets processing
圆插补加工
5)  linear acceleration/deceleration interpola-tion
加减速直线插补
6)  direct processing
直接加工
补充资料:切削加工:插削
      利用插刀在竖直方向上相对工件作往复直线运动加工沟槽和型孔的切削加工。插削的工作方式与刨削类似(图1 插削示意图 )﹐但插刀装夹在插床滑枕下部的刀杆上﹐可以伸入工件的孔中作竖向往复运动﹐向下是工作行程﹐向上是回程。安装在插床工作台上的工件在插刀每次回程后作间歇的进给运动。插刀的材料主要用高速钢﹐在插削钢和铸铁时的切削速度一般为15~25米/分。为了避免回程中插刀后刀面与工件发生剧烈摩擦而损伤已加工表面和降低刀具寿命﹐可采用活动式插刀杆(图2 活动式插刀杆 )。插削的效率和精度都不高﹐故在批量生产中常用铣削或拉削代替插削。但插刀制造简单﹐生产准备时间短﹐故插削适于在单件或小批生产中加工内孔键槽或花键孔﹐也能加工方孔和多边形孔。对于不通孔或有障碍台肩的内孔键槽﹐插削几乎是唯一的加工方法。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条