说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 蓄热燃烧烧嘴
1)  regenerative ceramic burner
蓄热燃烧烧嘴
2)  regenerative burner
蓄热烧嘴
1.
3 Reheating Furnace of Jigang Plate Mill,the author bring forward a new arithmetic on the size of regenerative burner lumen base on the small ball in equivalent model.
在济钢中板厂3#加热炉设计中,提出了基于当量小球模型蓄热烧嘴内腔尺寸的新算法,并据此对烧嘴进行了结构优化设计,经使用获得了良好的效果。
2.
The new type regenerative burner can be used alone and installing easy.
介绍新型"自身"蓄热烧嘴,单个使用,安装方便,在锻造炉上实现了高温空气燃烧,提高了加热质量,降低了燃料消耗,取得了满意的效果。
3.
High temperature and low oxygen is the two basic characteristics of HTAC, the structure of regenerative burner has influence to O 2 concentration in the air.
高温和低氧是高温空气燃烧技术的两个基本特点 ,蓄热烧嘴的结构对炉内氧浓度的分布具有决定性影响。
3)  regenerative combustion
蓄热燃烧
1.
Based on the analysis of regenerative combustion method and the existing regenerative ladle heater,a new regenerative space combustion ladle heater is developed in combining with the practice ladle heating situation in Laiwu Steel Corporation.
在分析蓄热燃烧方法和现有蓄热式烤包器的基础上,结合莱钢炼钢厂钢包烘烤现状,研制开发了新的蓄热式空间燃烧烤包器。
2.
The principle and development history of regenerative combustion and its applications in metallurgical furnaces were introduced.
:文章对蓄热燃烧技术的原理、发展历史及其在冶金工业炉中的应用进行了介绍 ,并对蓄热燃烧中的换向阀及换向控制、NOx的控制等关键问题进行了分析 ,冶金工业炉需要实施这一项蓄热燃烧节能技术改造 ,以提高其热能利用率 ,减少环境污
3.
According to the application of regenerative combustion technology,flue gas flowing in the furnace,and the features of its system s heat transfer,it was set up in the paper a new kind of calculation for effective heat efficiency of combustion and furnace chamber,heat recovery rate,and total heat efficiency.
针对蓄热燃烧技术的运用和烟气在炉内的流动过程及系统的传热方式的特点,本文建立1种燃烧有效热效率、炉膛有效热效率、热回收效率与总热效率之间新的计算式,并对其中的各种影响因素进行了分析,其分析结果对炉型设计、热效率计算、技术改造等起到指导作用。
4)  regenerative burner
蓄热式烧嘴
1.
Against the main problem of combustion gas leak in the using process of regenerative burner at No.
文章针对济钢中厚板厂2#加热炉蓄热式烧嘴使用过程中出现的冒火问题,介绍了优化改造方案及其应用效果。
2.
In accordance with the reform item of the heating furnace with regenerative burner in No.
结合公司第一小型轧钢厂蓄热式烧嘴加热炉中修改造项目,介绍了蓄热式烧嘴加热炉的概况、燃烧系统的结构特点。
3.
The characteristics,performance parameters and control system of walking beam furnace with regenerative burner were introduced.
介绍了本溪钢铁集团公司特钢厂蓄热式烧嘴步进梁式加热炉的特点、技术性能参数及对该炉的控制和管理情况,并介绍了蓄热式燃烧系统的主要特征。
5)  burner regenerative chamber
烧嘴蓄热体
6)  regenerative burners
蓄热式烧嘴
1.
The author points out an average of 50% of increase in heat utilization efficiency can be achieved by adopting such kind regenerative burners.
简要介绍了熔铝炉用蓄热式烧嘴技术的原理,熔铝炉采用该技术可使炉子热效率提高到50%左右,可实现烟气余热的最大回收,较好地解决了高温烟气余热回收中粉尘附着和侵蚀的技术难题;还结合生产实践对熔铝炉采用蓄热式烧嘴时应注意的一些问题、常见的故障及处理方法进行了讨论。
补充资料:蓄热式换热
分子式:
CAS号:

性质:工业中的换热方式之一。利用固体填充物贮蓄热量以达到换热目的。当气体通过时,根据气体的温度高于或低于填充物的温度,可将热量传给填充物或从填充物吸取热量。常用于冶金工业,也用于化学工业等。例如炼钢平炉和煤气炉常用来预热空气等。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条