1) thickness distribution
横向厚差
1.
In this paper,the reation between sheet shape and thickness distribution in width is set up including the influence of out tension based on measured tensions in works The influence of out tension to sheet shape is solved quantitatively It is important to improve the calculated accuracy of shape contro
以现场实测前张力分布为依据，考虑了前张力对板形的影响，建立板形与横向厚差的关系。
2.
In this paper, the relation between sheet -shape and thickness distribution in width is set up include the influence of out-tension based on measured tensions in works, The influence of out-tension to sheet shape is solved quantitatively.
本文以现场实测前张力分布为依据，考虑了前张力对板形的影响，建立起板形与横向厚差的关系。
2) transverse wall thickness
横向壁厚
1.
It was found that the transverse wall thickness distribution is nonuniform and that is the cause of hexagonal bore formation.
通过研究各机架出口断面不同点的壁厚变化,得出减径后钢管横向壁厚分布不均,探讨了内六方缺陷产生的原因。
2.
The transverse wall thickness of stretch-reduced tube product is unevenness to result in the formation of bore polygon by researching its distribution.
根据张力减径机的孔型特点,建立了全系统三维弹塑性有限元分析模型,对18机架张力减径过程进行数值模拟,通过研究横向壁厚分布,得出减径钢管产品沿圆周方向的壁厚分布不均,产生内多边形缺陷,并将模拟结果与实测结果进行对比,验证了所建立模型的准确性。
3) horizontal thickness
横向厚度
1.
Inquirng into the relation of shape and distribution of horizontal thickness;
板带板形与横向厚度分布关系探讨
4) transverse tooth thickness
横向齿厚
5) longitudinal tolerance
纵向厚差
6) transverse temperature difference
横向温差
补充资料：差差
1.犹参差。不齐貌。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条