1) anvil material
砧模材料
1.
The anvil materials for hot upset applications are reviewed in the present paper,and an emphasis is put on processing parameters, the compositions and key properties of the highTungsten alloys for anvil application.
介绍了电热镦粗用的砧模材料，着重讨论了钨合金砧模材料的成分、工艺方法、材料的主要性能以及砧模的使用情况。
2) die material
模具材料
1.
Mechanical property and microscopic structure research on die material ZGM2 alloy for isothermal forging;
等温锻用模具材料ZGM2合金的组织性能研究
2.
Static and dynamic bending properties of HSS die materials M2;
M2高速钢模具材料静态与动态弯曲性能
3.
Reasonable selection of cold stamping die materials
冷冲压模具材料的合理选择
3) Pattern material
模样材料
1.
In this paper the requirements of EPC on pattern materials were introduced,in which the advantages and application of interpolymer,STMMA were infroduced mainly.
本文介绍了消失模铸造对模样材料的要求。
4) mold material
模具材料
1.
The Mold Material Selection Based on the Case-Base Reasoning;
基于事例推理的模具材料选择
2.
According to the rapid mold materials′special need, the contrast relations of different proportion of epoxy resin matrix composite to the performances including flexural strength impact strength, rigidity, melt fluidity and mechanical processing were discussed.
根据快速模具材料的特殊性要求,讨论了快速模具用环氧树脂(EP)基复合材料在不同配比下弯曲强度、冲击强度、硬度、熔体流动性和机械加工性等的对比关系,从而优化出综合性能最佳的快速模具用EP基复合材料。
3.
Mold material of rapid sand casting is one of important factor for realizing rapid sand casting.
快速砂型铸造用模具材料,是实现快速砂型铸造的重要因素。
5) surrogate
[英]['sʌrəɡət] [美]['sɝəgət]
模拟材料
1.
Cerium metal is considered as a surrogate of plutonium because of their similarities in physical and chemical properties for scientific research.
为探讨金属铈在超高真空条件下作为钚模拟材料的可行性,采用X射线光电子能谱(XPS)分析技术研究了超高真空条件下金属Ce表面氧化物在不同温度时的真空稳定性。
2.
As some similarities have been found between these two elements, we discuss the possibility of cerium and its alloy as a surrogate of plutonium and its alloys.
本文主要采用X射线光电子能谱(XPS)分析技术对金属Ce、Ce-La合金的表面氧化反应及氧化层结构进行了较为系统的研究,并将金属Ce的化学性质与金属Pu的相关性质进行对比,对用金属Ce作为金属Pu实验模拟材料的可行性进行了探讨。
6) mould material
模具材料
1.
The development of mould materials for plastic mould is introduced, and some new types of materials for plastic mould, heat treatment technology, properties and application of mould materials are mainly discussed.
阐述了我国塑料模具材料的发展状况,重点介绍了一些新型塑料模具材料的牌号、热处理工艺、性能和应用,并对我国塑料模具材料今后的发展提出了一些建议。
2.
This paper analyses the major factor for the working life of the cold punching die,discusses the efficient measures which can improve the working life of cold punching die and presents the base for increasing the working life of the cold punching die by choosing reasonable die parameters,the efficient measures,and correc mould materials and adopting the surface intensified technology.
阐述了合理选择模具设计参数是提高冲裁模具寿命的基础,正确选用模具材料和采用表面强化工艺是提高模具寿命的有效措施。
3.
The current status and technological progress of die&moulds,mould standard compoˉnents,mould materials in our country were introduced and development trend of mould technology in our country was analyzed by the reviews of level of die&moulds,standard components and mould materials.
通过对第十一届中国国际模具技术和设备展览会上参展的各类模具、模具标准件、模具材料等进行的水平评述,介绍了我国模具、模具标准件、模具材料的发展现状和技术进步,分析了我国模具技术的发展趋势。
补充资料：霜砧
1.寒秋时捣衣的砧声。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条