说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 复合陶瓷层
1)  composite ceramic layer
复合陶瓷层
2)  ceramic composite layer
陶瓷复合层
1.
The ceramic composite layer with the thickenss of 1~4 mm was designed on hammer working face for enhancing its abrasion resistance.
为了增加锤头的耐磨性,在锤头工作面上设计一层4~10mm厚度的陶瓷复合层,该陶瓷复合层采用实型负压消失模铸造和铸渗法铸造相结合的方法形成。
3)  composite ceramic coating
复合陶瓷涂层
1.
Preparation and properties of Al_2O_3 based composite ceramic coating on pure copper surface by thermo-chemical reaction spraying
热化学反应喷涂Al_2O_3基复合陶瓷涂层的制备及其性能
2.
A nanostructured Al2O3-13%TiO2+ZrO2+CeO2 composite ceramic coating was deposited by plasma spray technique.
借助扫描电镜和能谱分析,观测了等离子喷涂Al2O3-13%TiO2+ZrO2+CeO2纳米复合陶瓷涂层的显微组织和微区成分;通过硬度检测和相分析,研究了250℃和500℃低温退火对涂层硬度、晶粒度、断裂韧性以及相组成的影响。
3.
It was shown that the connected porosity in Ni/Al-13wt%TiO 2/Al 2O 3 gradient composite ceramic coating was much lower than that in Al 2O 3 ceramic coating.
为了解决陶瓷涂层中的通孔问题 ,把复合材料与梯度材料的概念应用到陶瓷涂层 ,采用等离子喷涂技术在Q2 3 5钢表面形成Ni/Al-13wt %TiO2 /Al2 O3 梯度复合陶瓷涂层 ,对其在沸腾的 5 %HCl溶液中的腐蚀行为进行了研究。
4)  composite ceramic coatings
复合陶瓷涂层
1.
The effect of composite ceramic coatings(Al2O3,SiC,ZrO2) on the corrosion resistance of carbon steel was investigated using electrochemical impedance spectroscopy(EIS).
利用电化学阻抗谱法就Al2O3、SiC、ZrO2复合陶瓷涂层对碳钢的防腐蚀性能进行了研究。
5)  Laminated ceramic composites
层状复合陶瓷
1.
Based on the multilayer beam model, with a view to the heterogeneity of the material, this paper focused on the fracture behavior of the laminated ceramic composites by the finiteelement method.
基于多层梁模型,在考虑材料非均匀性的基础上,采用有限元数值模拟的方法研究 了层状复合陶瓷的断裂行为。
2.
In this paper,the different mechanisms that can be used to reinforce laminated ceramic composites were reviewed,optimum design f such composites was analyzed and preparation was concluded.
层状复合陶瓷具有显著的增韧效果 ,其独特的层状结构为陶瓷材料的设计和制备工艺技术提出了新的研究课题 ,成为当前陶瓷增韧技术研究的热点。
3.
The dated work about laminated ceramic composites is reviewed- The preparation methods, the bonding be-tweed interfaces and the effects of interfaces on the Iaminated ceramic composites were discrided.
本文综合评述了层状复合陶瓷研究现状,分析了层状复合陶瓷的制备工艺和界面结合情况以及界面对层状复合陶瓷性能的影响。
6)  laminated ceramics
层状复合陶瓷
1.
the composites composed of the monolithic Si3N4 ceramics and Si3N4/BN laminated ceramics have been prepared through bullet-proof structure designing,and the behavior of armour pierced-resistance of such materials was studied.
提出混杂结构设计的构思,并成功地制备了具有混杂结构的Si3N4/BN层状复合陶瓷,同时研究了材料的抗穿甲燃烧弹冲击的能力。
2.
The behaviors of impact resistance and armour pierced-resistance of Si3N4/BN laminated ceramics were studied.
研究了Si3N4/BN层状复合陶瓷的抗冲击破坏及抗穿甲破坏行为。
补充资料:生物惰性陶瓷涂层-金属复合材料
分子式:
CAS号:

性质:生物惰性陶瓷涂于医用金属基底上形成的复合材料。陶瓷材料主要是氧化物生物陶瓷和医用碳素材料。金属材料包括不锈钢、钴基合金和钛基合金等。制备涂层的方法有等离子喷涂、气相沉积、离子溅射、浸渍、烧结、电泳和热解等。复合材料主要用于制造人工骨、关节柄、关节臼、人工心瓣膜和人工牙根等。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条