1) Hank physiological solution
Hank模拟体液
1.
The behaviours of intergranular corrosion on the rolled 316L and cast 317L implant stainless steels were studied by using SEM in the process of corrosion fatigue in Hank physiological solution.
用SEM研究了浸在Hank模拟体液小的轧态316L和铸态317L不锈钢在腐蚀疲劳期间产生的晶间腐蚀结果表明，腐蚀疲劳动的裂纹是在腐蚀晶界上孕育产生的，在疲劳应力作用下，由沿晶扩展变为穿晶扩展；晶间腐蚀不是山碳化物析出造成晶界贫Cr产生的，而是一种非敏化晶间腐
2) simulated body fluid
模拟体液
1.
Preparation of nano-hydroxyapatite by simulated body fluid;
模拟体液法制备纳米级羟基磷灰石
2.
Investigation about Adsorbing Characteristics and Principles of Silk Fiberin Simulated Body Fluid;
蚕丝纤维在模拟体液内吸附特性与机理的研究
3.
Preparation of biomimetic nanograde hydroxyapatite in simulated body fluid;
模拟体液法制备仿生纳米级羟基磷灰石
3) SBF
模拟体液
1.
Determination of nickel in SBF by graphite furnace atomic absorption spectrometry;
石墨炉原子吸收测定模拟体液中的镍
2.
Study on Formation of Bone-like Apatite of BGC Modified by Cold Plasma in SBF;
改性玻璃陶瓷在模拟体液中类骨磷灰石层形成的研究
3.
The in vitro bioactivity of merwinite powers was studied by soaking them into simulated body fluid(SBF).
用溶胶-凝胶法制备出纯相镁蔷薇辉石(Ca3MgSi2O8)粉体,并在10MPa的轴向压力下,将其压制成尺寸为Φ10mm×5mm的圆柱状块体,通过模拟体液浸泡对其体外生物活性进行研究。
4) simulated body fluid(SBF)
模拟体液
1.
Hydroxyapatite(HAp) and HAp/chitosan nanocomposite powders were prepared in simulated body fluid(SBF) or SBF containing chitosan.
从仿生合成的思路出发,分别以模拟体液和含有壳聚糖的模拟体液为反应介质,通过磷酸和硝酸钙反应合成了羟基磷灰石(HAp)和HAp/壳聚糖复合粉体,利用TG-DTA、XRD、FT-IR和TEM等对HAp和HAp/壳聚糖的形成过程、结构及其微观形貌进行了研究。
2.
New dense apatite layer forms on the surface of magnesium containing HA/β-TCP coating after soaking in simulated body fluid(SBF).
在模拟体液中,在复合涂层表面沉积出了较为明显的新生类骨层。
5) simulated body fluid (SBF)
模拟体液
1.
The pure Mg samples were treated as surface modification by alkali heat treatment to improve its corrosion resistance in the simulated body fluid (SBF) solution.
为了提高纯镁在仿生模拟体液(SBF)中的耐腐蚀性能,对纯镁进行了碱热处理表面改性。
2.
In vitro bioactivity tests were performed in simulated body fluid (SBF).
样品采用体外实验(invitro)方法,在模拟体液(SBF)内浸 泡不同时间。
6) model fluid
模拟液体
补充资料：hank dyeing
分子式：
CAS号：
性质：纤维纱线以绞束状悬挂在专用染色机中排式杆上，以泵或机械装置使染液循环或搅动而获得匀染的染色。
CAS号：
性质：纤维纱线以绞束状悬挂在专用染色机中排式杆上，以泵或机械装置使染液循环或搅动而获得匀染的染色。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条