说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 均压气室
1)  counter pressure air-chamber
均压气室
2)  pressure in the air chamber
气室压力
1.
It considered two extreme conditions to determine the height of liquid seal and gas-liquid mixture inlet,and find the pressure in the air chamber was one of important relating parameters.
通过两种极端工况分析,确定气室压力是决定分离器液封高度和气液混合物的进口高度的重要参数之一,通过井口压力与井底压力关系,建立简单实用的环空返回钻井液的压力预测分析计算流程确定井口压力,从而可对液封高度进行较精确的工程计算,对此类分离器设计开发、现场应用时的选型都具有重要意义。
3)  pressure room
气压室
4)  plenum chamber
高压气室
5)  air cushioned surge tank
气垫调压室
1.
Gas characters of air cushioned surge tank in the processes of hydraulic transients in the pressurized pipe of waterpower plant are studied.
研究了气垫调压室内封闭气体在水电站输水系统瞬变过程中的热力学特性 ,针对目前普遍采用的理想气体多变方程 ,结合气垫调压室内封闭气体在系统瞬变中实际特性 ,提出了四个子过程处理方法 ,指出在不同的子过程中气体的多变指数是不同的 ,其理论取值可能超过 1 4,同时采用该理论解释了、含气垫调压室的引水道系统能量耗散机理 ,并结合模型试验成果进行了对比分析 ,为气垫调压室的合理设计与安全运行提供了理论依据。
2.
Based on the test data on the impedance model on the bottom of the air cushioned surge tank, the formulas for calculating the hydraulically stable cross sectional area are derived from a Lyapunoff function.
通过对气垫调压室底部阻抗模型试验成果的分析研究 ,采用试验结果与理论计算相结合的方法 ,得出了能够较真实地反映调压室底部阻抗等因素对气垫调压室波动稳定断面影响的截面积计算公式 。
3.
The formulae for calculating surges in an air cushioned surge tank following load rejection are derived from the solution of the basic equations of the surge tank by use of the asymptotic expansion of infinitesimal parameters.
基于气垫式调压室室内水位波动的周期 (或频率 )随时间变化不大的特点 ,按小参数幂的渐近展开方法求解了气垫调压室的基本方程式 ,得出了机组弃荷时的涌浪计算公式 。
6)  air cushion surge chamber
气垫调压室
1.
The technique of air cushion surge chamber and the new type of arrangement scheme of diversion pipe route are used in the optimization design of Xiaotiandu hydropower station which is located in the Kangding county of Garze Tibetan autonomous prefecture of Sichuan province.
四川省甘孜藏族自治州康定县境内的小天都水电站 ,在优化设计中采用了气垫调压室技术和新型的“一坡到底”方式布置引水洞线的布置方式。
2.
In this paper,a mathematical model for form optimization of the air cushion surge chamber is established with the minimum total volume as objective function.
以总容积最小为目标,建立了气垫调压室体型优化的数学模型,采用遗传算法求解该模型,从而为合理选择调压室截面积、气室高度、室内水体高度及初始气体压力等基本参数提供了科学依据。
补充资料:双室油淬加压气淬真空炉ZYC_2-65


双室油淬加压气淬真空炉ZYC_2-65


  双室油淬加压气淬真空炉zY02—65
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条