说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 陶瓷粉末喷涂
1)  ceramic powder spray
陶瓷粉末喷涂
2)  ceramic powders
陶瓷粉末
1.
Synthesis and analysis of boride ceramic powders;
硼化物陶瓷粉末的合成与分析
2.
borides and composite ceramic powders.
采用自蔓延高温还原合成方法制备TiB2,TiB2-A l2O3和ZrB2-Al2O3陶瓷粉末。
3.
The base principle,key technology,characteristic and progress on synthesis of ceramic powders by solid-state metathesis reactions are described.
本文扼要地介绍了固态复分解反应法制备陶瓷粉末的基本原理、关键技术、特点及其研究进展。
3)  ceramic powder
陶瓷粉末
1.
The experimental research on the low-voltage electromagnetic compaction of PZT ceramic powders;
PZT陶瓷粉末低电压电磁压制实验研究
2.
Research on Selective Laser Sintering of Ceramic Powder;
选择激光烧结陶瓷粉末的研究
3.
Mechanism analysis and experimental research on forming parts by laser sintering ceramic powders;
激光烧结陶瓷粉末成型零件的机理分析和实验研究
4)  ceramic spraying
陶瓷喷涂
1.
The application of ceramic spraying technology on reciprocated pump for excluding salt-water
陶瓷喷涂技术在往复排盐泵上的应用
5)  powder spray
粉末喷涂
1.
The article briefs the on line coating technology of powder spray all over the world.
介绍了粉末喷涂在线镀膜技术国内外发展概况,对镀膜重要工艺过程及影响因素进行了详细分析和总结,并对应用前景进行了展望。
2.
The article describe the bi-layer on glass with on line coating technology by chemical vapor deposition(CVD)and powder spray(PS)pyrolysis.
介绍了采用化学气相沉积(CVD)和粉末喷涂(PS)方法制备双层膜的工艺技术,采用原子力显微镜(AFM)和膜厚测试仪等对镀膜玻璃样品进行了研究分析。
3.
The advantages of the electrostatic powder spray technology and the present state of application of the technology in our country and abroad are described.
介绍了静电粉末喷涂技术的优点及国内外应用静电喷涂的状况,对静电粉末塑涂工艺及经济效益进行了分析,并结合实际,对铁路工厂上塑涂工艺的经济前景做出了预测。
6)  powder coating
粉末喷涂
1.
Research and application of process on powder coating of MDF;
中密度纤维板静电粉末喷涂工艺研究和应用的进展
2.
Disadvantages caused by powder escaping from the powder coating booth are listed.
列举了粉末喷涂过程设备逸粉的危害,提出粉末喷涂设备设计要"五位一体"统筹考虑的设计思想,并从设备选型、设备设计、设备管理、设备改造诸方面提出防止粉末外逸的解决方案。
3.
The effects of pretreatment for powder coating on the galvanized steel sheet were investigated through tests of cryslalography, film weight and salt spray test, and the existing process was improved.
对一种用于汽车和通讯行业的新型预磷化镀锌钢板的粉末喷涂前处理工艺进行了研究,通过晶相、膜质量及盐雾试验,对预磷化板的现有工艺进行了改进。
补充资料:热喷涂合金粉末的用途
热喷涂是一种表面强化技术,一直是我国重点推广的新技术项目。它采用电弧、等离子弧、燃气一氧气等形式的热源,将金属或非金属材料加热到熔化或半熔化状态,并在高速气流的作用下使之雾化成微细熔滴或高温颗粒,以很高的飞行速度喷射到经过处理的工件表面,形成牢固的覆盖层,从而使工件表面获得不同硬度、耐磨、耐腐、耐热、抗氧化、隔热、绝缘、导电、密封、消毒、防微波辐射以及其他各种特殊物理化学性能。它可以在设备维修中修旧利废,使报废了的零部件“起死回生”;也可以在新产品制造中进行强化和预保护,使其“益寿延年”。

     喷涂粉末在整个热喷涂材料中占据十分重要的地位。热喷涂合金粉末包括镍基、铁基和钴基合金粉,按不同的涂层硬度,分别应用于机械零部件的修理和防护。热喷涂技术经过多年的发展,在国内已形成了一个完整的设备的研究和生产体系,目前从事这一工作的有二十多个单位,能够生产各种类型的氧乙炔火焰喷涂设备、喷熔设备、电弧喷涂设备,成套等离子喷涂设备、喷焊设备,各种专用的配套设备等。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条