1) without deoxygenation
不除氧
2) deoxidization
[英][di:,ɔksidai'zeiʃən] [美][di,ɑksədə'zeʃən]
除氧
1.
Application of Na2SO3 to chemical deoxidization;
亚硫酸钠化学除氧的应用
2.
For deoxidization water dissolve oxygen exceed the permit standard in spray padding deoxidization vessel, we altered spray padding deoxidization to membrane deoxidization .
针对喷雾填料式除氧器除氧水溶解氧含量超标的问题 ,将喷雾填料式除氧器改为水膜填料式除氧器 ,满足了生产工艺要求 ,保证了设备的正常运行。
3.
The characteristics of several deoxidization methods,which are researching currently,are briefly represented;experimental study on the deoxidization of low concentration coalbed methane in a tubular furnace is also carried on in this paper.
阐述了现行正在研究的几种除氧方法的特点,并采用管式炉实验装置对低浓度煤层气除氧进行了实验研究。
3) deoxygenation
除氧
1.
Experiment study on catalytic hydrogenation deoxygenation technology with Pd/ion exchange resin;
钯/离子交换树脂催化加氢除氧技术的实验研究
2.
Study of Hydrazine Deoxygenation in Neutral Aqueous Solution;
中性水质中催化联氨除氧效果试验研究
3.
Four kinds of methods of deoxygenation , such as by introduced in accordance with (he routine mam-tance of water healers, prpe networks and radiators.
分析了热水供暖系统中氧腐蚀机理及危害,针对热水锅炉、管网及散热器的日常养护,提供了热力除氧、化学除氧、真空除氧和解吸除氧4种除氧方法。
4) deaeration
[di,eiə'reiʃən]
除氧
1.
The selection of appropriate deaeration and de - salting equipment and proper design of the velocity and selection of corrosion - resistant materials like 12Cr2AlMo and Cr5Mo etc can effectively control the corrosi.
选用先进的除氧除盐设备,合理的流速设计和选用12Cr2AlMo,Cr5Mo等耐蚀材料可有效控制软化水系统的腐蚀。
2.
This article introduces the necessary for equipping with the exhaust steam device with deaeration function in detailed,describe several arrangement structures of deaerator,and give a general instruction for the features of the exhaust steam device equipped with the surface heat exchanger.
较为详细地介绍了设置除氧功能排汽装置的必要性,阐述了除氧装置的几种布置结构,并对具有表面式换热器的排汽装置的应用特点进行了简要描述。
3.
This paper states the theory of supplying water deaeration for industry boiler and analyses the common techniques of deaeration by heating, vacuum and adsorption.
阐述了工业锅炉给水除氧的原理,并对常用的热力除氧、真空除氧、解吸除氧等技术进行了分析。
5) Oxygen removal
除氧
1.
Some kinds of oxygen removal methods in hot water heating system were introduced.
文中分析了热水供暖系统中的氧腐蚀机理,指出了氧腐蚀的危害性,介绍了热水供暖系统中的几种除氧方式。
2.
There are many familiar oxygen removal methods of boiler feedwater all over the world,the advantages and disadvantages of which are analyzed.
分析了国内外常见锅炉给水除氧方式的优缺点,为工程人员选择除氧方式提供参考。
3.
The analysis of the techniques and characteristics of the conventional oxygen removal by heating method,vacuum method,analytical method and chemical reagent method are made and the comparisons among these methods are made too.
对常用的热力除氧、真空除氧、解析除氧、化学药剂除氧等技术和特点进行了分析比较 ,提出解析除氧器比较适合于黄金矿山企
6) deoxygenization
除氧
1.
Proposes two solutions, the first is controlling the pH value of the complementary water and changing the deoxygenization method to solve the corrosion problem during operation, and the second is adding new efficient deoxidant of acetone oxime to solve the corrosion problem during suspending period.
提出了通过调控热网补充水的 pH值和改变除氧方式来解决运行中的腐蚀问题 ,通过添加新型高效除氧剂丙酮肟来解决停运后的腐蚀问题的方
2.
After analyzing the operation situation of kerosene deoxygenization unit of Unibon system in Linear Alkylbenzene Plant,Jinling Petrochemical Co.
分析了金陵石化分公司烷基苯厂加氢装置煤油除氧单元生产运行情况,对除氧单元运行中存在的进料换热器频繁结焦问题进行工艺设计改进,将原精馏除氧改为加氢除氧,在加氢除氧反应温度50℃,压力0。
补充资料：除氧器
用于除去锅炉给水中的溶氧及其他气体的装置。火电厂中给水溶氧是造成热力设备腐蚀的主要原因。因而，锅炉给水除氧是防止设备腐蚀、保证安全运行的重要环节。此外，除氧器还可作为回热系统中的一个混合加热器，把高压加热器的疏水、火电厂各处水质合格的疏水、锅炉排污水经扩容蒸发、冷凝后汇集起来予以利用，以减少汽水损失。
火电厂中的除氧器采用热力除氧原理，即在除氧器中将水加热到沸点，利用水蒸汽的分压将溶解于水中的氧及其他气体排出。火电厂的除氧器均为混合式，根据加热蒸汽的压力分为真空式、大气式(工作压力为120～250千帕）和高压式（工作压力为600千帕）；按结构形式分为膜式、淋水盘式、喷雾式、填料式、喷雾填料式、喷雾蒸汽喷盘式等；按除氧头的布置方式又可分为立式和卧式。真空除氧通常在凝汽器内进行，作为初步除氧。高压和超高压汽轮机大多采用高压除氧。
火电厂中的除氧器采用热力除氧原理，即在除氧器中将水加热到沸点，利用水蒸汽的分压将溶解于水中的氧及其他气体排出。火电厂的除氧器均为混合式，根据加热蒸汽的压力分为真空式、大气式(工作压力为120～250千帕）和高压式（工作压力为600千帕）；按结构形式分为膜式、淋水盘式、喷雾式、填料式、喷雾填料式、喷雾蒸汽喷盘式等；按除氧头的布置方式又可分为立式和卧式。真空除氧通常在凝汽器内进行，作为初步除氧。高压和超高压汽轮机大多采用高压除氧。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条