1)  Dynamic interfacial tension
乳化剂初始位置
2)  Emulsification
乳化
1.
Analysis on causes for cracked gasoline emulsification and technical measures;
裂解汽油发生乳化的原因分析及技术措施
2.
Reasons for Diesel Oil Emulsification during Alkaline Wash and Its Countermeasures;
直馏柴油碱洗乳化的适用技术及抗乳化建议
3)  emulsify
乳化
1.
In this paper, the quaternary ammonium type cationic polymers prepared by our lab was used as emulsifier to emulsify AKD wax, and also PAC was used to increase the charge of the emulsion.
用自制季铵型阳离子聚合物复配乳化剂乳化AKD,研究了乳化时间、温度、搅拌速度以及乳化剂用量等因素对AKD乳液性能的影响。
2.
The effect of different DPCP content in the terminal capping agents on the emulsifying property of the waterborne curing agents as well as the physical properties and heat resistance of coating films is studied.
采用环氧树脂与二乙烯三胺反应生成端胺基环氧-胺加成物,再经氯磷酸二苯酯(DPCP)与单环氧化合物封端和成盐,合成了一系列不同磷含量的新型水性环氧自乳化固化剂。
4)  emulsion
乳化
1.
Optimal preparation of emulsion cassia oil and its ovicidal action against Lucilia sericata (Meigen) damaged kipper.;
乳化肉桂油优化制备及对咸鲞害虫丝光绿蝇的杀卵作用研究
2.
Stability of emulsion from bio-oil and diesel;
生物油/柴油乳化燃油稳定性试验
3.
Study And Application Of Modified Emulsion Asphalt About Micro-Surfacing;
微表处用改性乳化沥青的研究及应用
5)  emulsifying
乳化
1.
Development of HD cationic emulsifying wax;
HD阳离子乳化蜡的研制
2.
By the experiment of emulsifying and deviscousing to viscous oil by bacteria,we have selected and fostered the high and extensive efficiency surfactant producing bacteria(WS-SPB);have analyzed the factors which affect the growing of WS-SPB,initially obtained its best conditions of growth;have run the experimental study of emulsifying and visbreaking viscous.
通过稠油微生物乳化降粘试验,筛选培养出高效、广谱的产表面活性剂菌种(WS-SPB);分析了影响WS-SPB生长的因素,初步得出其最佳生长条件;进行了WS-SPB稠油乳化降粘试验研究,评价其稠油降粘效果;对其现场应用潜力进行分析,对进一步优化培养优良产表面活性剂菌菌种提出了建议。
3.
By using 56# semi-purified paraffin as the primary starting material,adding the composite emulsifying agent,an emulsified wax for wood processing is developed,which has good water-resistant property.
以56#半精炼石蜡为主要原料,通过加入复合型乳化剂,研制出具有良好抗水性能的木材加工用乳化蜡。
6)  emulsifier
乳化
1.
Meanwhile, the effect of thickener or emulsifier and the control of standard of quality, hygiene of producing place and idealization are also in- quired.
本文就原材料的配方、主要生产设备、生产工艺流程、原料预处理、操作过程中的操作要点及质量标准等诸多方面进行了详细论述,并对产品的增稠乳化效果、理化指标的控制及生产场所的卫生要求进行了探讨。
2.
The influences of various factors on the performance of emulsified fuel were studied including temperature, water amount, quantity of the emulsifier and the stirring intensity.
用超稠油乳化制备乳化燃料油 ,是一条有效的利用途径。
参考词条
补充资料:乳化剂T
分子式:
CAS号:

性质:俗称吐温T。主要化学组分为聚氧乙烯失水山梨醇单脂肪酸酯。系列产品有乳化剂T=20(R=C11H23,n=20);T-40(R=C15H31—,n=18~22);T-60(R=C17H35,n=20);T-80(R=C17H33—,n=20)。均属非离子型表面活性剂。淡黄色黏稠液状物或固体。溶于水和多种有机溶剂。不溶于油脂与矿物油。对酸、碱及金属盐稳定。具有良好的乳化、润滑、渗透等性能。在酸或碱催化剂存在下,山梨醇与脂肪酸加热酯化,再用不同摩尔比的环氧乙烷缩合而制得。主要用作油/水型乳化剂、腈纶织物的柔软剂和抗静电剂。还可作合成纤维纺丝油剂。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。