说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 镀锌原板
1)  zinecoated crude sheet
镀锌原板
1.
On the premise of having the basic condition of minusdeviation rolling of zinecoated crude sheet, through allotting deformation amount, selecting tension value and improving technology and management such as operation method, the fivestand colding continuous rolling mills of Wuhan Iron and Steel Corporation have made good effect on minusdeviation rolling of zinecoated crude sheet.
武钢5机架冷连轧机在具备了镀锌原板负偏差轧制的基本条件下,通过变形量分配、张力值选择、作业方法等技术和管理上的改进,使负偏差轧制镀锌原板取得较好效果,镀锌板成材率提高2。
2)  the coating of galvanized plate
镀锌板镀层
1.
Determination of trace cadmium in the coating of galvanized plate by hydride generation atomic fluorescence spectrometry
氢化物发生-原子荧光光谱法测定镀锌板镀层中痕量镉
3)  galvanized sheet
镀锌薄板
4)  galvanized steels
镀锌板
1.
The passivation technology of galvanized steels were reviewed in details,specially the development of research on organofunctional silanes films and their anti-corrosion performance.
综述了有机硅烷的结构、分类、钝化工艺和缺陷,以及有机硅烷在镀锌板上的研究进展和耐蚀性能。
5)  galvanized steel
镀锌板
1.
The effect of shielding gas type on laser weldability of galvanized steel;
保护气体种类对镀锌板激光焊接性的影响
2.
88mm galvanized steel,T-joint type,0.
88mm厚的镀锌板进行了激光钎焊实验,采用T形接头形式,焊丝为0。
3.
The zinc distribution and corrosion resistance of the laser-welded joint of galvanized steel were investigated.
研究了镀锌板激光焊接接头锌的分布及焊接接头耐蚀性能。
6)  galvanized sheet steel
镀锌钢板
1.
The commercial hot-dip galvanized sheet steel was investigated for its corrosion behavior in three different seawater zones in Qingdao with electrochemical measurement,weight loss test and SEM.
开展了热镀锌钢板在青岛不同海水区带的实海腐蚀测试,并利用电化学测试、失重腐蚀测试和扫描电镜研究了镀层的海水腐蚀行为。
2.
With the rapid development of Chinese economy, demands for galvanized sheet steels increased significantly because of the rapid development of construction and automotive industry during the last decade.
随着国内经济的持续稳定发展,在过去的10年中,由于建筑和汽车行业的快速发展,对镀锌钢板的需求持续旺盛。
3.
occured in forming and after coating of the prephosphating galvanized sheet steel,this paper demonstrates analyses on all kinds of influential factors happened in production and forming in detail,after that,provides some solutions on purpose.
为解决预磷化镀锌钢板加工成形、涂装后易出现的条影、针孔、粗糙等问题,对其生产及加工成形过程中的各种影响因素进行了详细分析,并有针对性地提出一般的解决办法。
补充资料:原板
1.原刻的印板。亦比喻原模原样。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条