1)  shell plate
板壳式
1.
In this paper,based on efficient horizontal circular tube spray falling film evaporator,a new kind of shell plate falling film evaporator has been developed,which has combined with the structural characteristics of the shell plate heat cxchanger and the plate type evaporator.
结合板壳式换热器和板式蒸发器的结构特点,在高效水平管喷淋式降膜蒸发器的基础上,开发一种新型板壳式降膜蒸发器,理论分析和实验结果均表明,以椭圆腔板束为蒸发内件的新型蒸发器,蒸发速度快,传热效率高。
2)  helical plate shell type
螺旋板壳式
1.
The result shows that condensing temperature can be decreased from 45 ℃(for tube-shell type) to 32 ℃(for helical plate shell type) under the same heat transfer area and inlet/outlet temperature of cooling water,the consumption of compressor about 13%,which accords with the theoretical results.
对中海油某浮式生产储油轮上水冷空调机中冷凝器进行螺旋板壳式和管壳式的对比试验。
3)  plate shell heat exchanger
板壳式换热器
1.
Although plate shell heat exchanger(PSHE) is developed after plate heat exchanger(PHE), it can be applied to several heat and mass transfer processes that PHE can't do, especially for those involve liquid film distribution, due to its open outside channels of the plate surfaces.
板壳式换热器是从板式换热器发展而来 ,但其敞开的板外侧通道可以实现多种板式换热器所不能完成的传热过程 ,特别是液膜传热传质过程。
2.
The application and main characteristics of the plate shell heat exchangers were introduced in this article.
介绍板壳式换热器的主要特点和应用。
4)  plate-shell heat exchanger
板壳式换热器
1.
Research on strength and FEA of seal plate in compact plate-shell heat exchanger;
特殊板壳式换热器封板的有限元模拟及强度研究
5)  shell-and-plate heat exchanger
板壳式换热器
6)  helical plate heat exchanger
螺旋板壳式换热器
参考词条
补充资料:板壳式换热器
      以板管作为传热元件的换热器,又称薄片换热器。它主要由板管束和壳体两部分组成(图中)。将冷压成形的成对板条的接触处严密地焊接在一起,构成一个包含多个扁平流道的板管(图中)。许多个宽度不等的板管按一定次序排列。为保持板管之间的间距,在相邻板管的两端镶进金属条,并与板管焊在一起。板管两端部便形成管板,从而使许多板管牢固地连接在一起构成板管束。板管束的端面呈现若干扁平的流道 (图中)。板管束装配在壳体内,它与壳体间靠滑动密封消除纵向膨胀差。设备截面一般为圆形,也有矩形、六边形等。A流体在板管内流动,B流体则在壳体内的板管间流动。板壳式换热器是介于管壳式换热器和板式换热器之间的一种结构形式,它兼顾了二者的优点:①以板为传热面,传热效能好。传热系数约为管壳式换热器的 2倍。②结构紧凑,体积小。③耐温、抗压,最高工作温度可达800℃,最高工作压力达 6.3兆帕。④扁平流道中流体高速流动,且板面平滑,不易结垢,板束可拆出,清洗也方便。但这种换热器制造工艺较管壳式换热器复杂,焊接量大且要求高,因而它的推广应用受到一定限制。板壳式换热器用于化工、造纸、制药和食品等工业部门。典型产品主要用于要求传热效能好而停留时间短的食品、医药等加工工业。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。