1) laminated plate
叠层板
1.
State space method for the analysis of free-edge stresses of laminated plates;
叠层板自由边应力分析的状态空间法
2.
Taking the reinforced concrete slab to look upon as a laminated plate, which is composed of steel and concrete, then a study of the effects of steel reinforcement ratio of plate, thickness of plate and strength grade of concrete on static deflection, kinetic deflection and basic vibration frequency of plate has been made in the paper.
将钢筋混凝土板看作是由混凝土和钢筋组成的叠层板,本文研究了板的配筋率、板厚和混凝土强度等级对薄板的静力挠度、动力挠度和固有振动频率的影响;并得出改变板厚对静力挠度、动力挠度和固有振动频率的影响最为显著,其它依次为混凝土强度等级和板的配筋率。
3.
Bending of symmetric composite laminated plates supported simply at two opposite edges and arbitrarily at the others is studied in this paper by using the laminated plate theory, in which transeverse shear deformation is taken into account, presented before by the author.
本文应用作者以前提出的一种考虑横向剪切变形的叠层板理论，研究了二对边为简支另二对边为任意支承的复合材料矩形对称叠层板的静力弯曲，获得了该问题的解析解，并对其影响因素进行了研究。
2) laminates
叠层板
1.
Analysis to propagation of stress-wave and delaminating damages of layer-symmetrical composite laminates subjected to low velocity impact;
对称角铺设矩形复合材料叠层板受低速冲击时的应力波传及解层破坏分析
2.
Thus, the theory of state space is combined with variational solution,and the variational results for free vibration frequency of the laminates with arbitrary thickness are calculated.
根据应力变分和伽辽金变分原理，导出混合变分方程，并将其转换成状态方程，使状态空间理论和变分解相结合，给出任意厚度叠层板自振频率的变分解。
3) laminate
[英]['læmɪnət] [美]['læmənət]
叠层板
1.
Composite Laminates Deformation Analysis and Calculation After Curing;
复合材料叠层板固化成型后的变形分析计算
2.
Nonoinear stability analysis of space frame-laminate plate combined structures;
空间杆系与叠层板组合结构的非线性稳定分析
3.
A quadratic Fourier's law of heat conduction of whole laminated composite was given,and a 8 node quadratic thermal lamination element was also developed.
对Ｒｏｌｆｅｓ在９０年代初提出的热叠层理论进行了修正和发展：给出整个复合材料叠层板的二次傅里叶热传导定律；发展八节点二次热叠层单元；编制相应的程序，进行了数例计算。
4) Parallel-plate assembly
叠层板
1.
A model of multi-parallel-beams joined with a single-beam is adopted in the theoretical analysis of the natural vibration characteristics of the parallel-plate assembly.
叠层板状结构是新型核反应堆设计中所采用的一种堆芯元件,具有结构合理、比功率高和传热性能好等显著特点。
5) plate-type structure
叠层板
1.
The pipe theory is introduced into the flow-induced vibration research of a plate-type structure.
将管道理论引入叠层板状结构的流致振动研究,在势流理论下,基于输流管道的哈密顿原理,建立叠层板状结构的流致振动模型,用微分求积法对模型的运动方程进行求解,研究系统零流速状态的固有频率和模态,运用特征值分析与响应分析结合的方法,确定系统失稳的临界流速与形式。
2.
The dynamic behavior of plate-type structure is important in the fluid-solid coupling vibration.
叠层板状结构的流致振动特性是流固耦合振动研究的一个重要课题。
6) aminated composite panel
叠层靶板
1.
Numerical simulation of ballistic penetration of bulletproof laminated composite panels;
叠层靶板弹击实验及弹道侵彻机理的数值模拟研究
补充资料：层岩叠壑图
中国画。清代髡残作。纸本立轴。浅设色。画面景物繁复。上方左角大江浩淼，帆影依稀；右角山峰高峻，瀑流奔壑，山径左曲，至中幅复右折。近景绿树掩映，茅屋临溪。笔法苍秀醇厚，有雄奇磊落之致。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条