说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 聚氨酯脲乳液
1)  polyurethaneurea emulsion
聚氨酯脲乳液
1.
The microphase separation structure of carboxylic polyurethaneurea emulsions was studied by DSC,SEM and AXD,The results showed that the introduction of ionic groups into polyuretha neurea improved the microphase separation,and the soft segment segregation increased with the increase in the fraction of ionic groups.
利用DSC,SEM,WAXD对羧酸型聚氨酯脲乳液的微相分离结构进行了研究。
2)  polyurethane emulsion
聚氨酯乳液
1.
Modification of polyurethane emulsion and its application in water-based printing ink;
聚氨酯乳液的改性及其应用研究
2.
Study on waterborne polyurethane emulsion modified with silicone;
有机硅改性水性聚氨酯乳液的研究
3)  Polyurethane-Urea
聚氨酯脲
1.
Structure and properties of polyurethane/organic montmorillonite nanocomposites Ⅱ.Effect of ultrasonic dispersion on structure and properties of polyurethane-urea/organic montmorilonite nanocomposites;
聚氨酯/有机蒙脱土纳米复合材料的结构与性能 Ⅱ.超声波分散对聚氨酯脲/有机蒙脱土纳米复合材料结构与性能的影响
2.
The solvent-based polyurethane-urea(PUU) resin was prepared by using PPG600 /PPG2000 blended polyether,isophoronediisocyanate(IPDI) and isophorone diamine(IPDA) as raw materials.
以PPG600和PPG2000混合聚醚、异佛尔酮二异氰酸酯(IPDI)和异佛尔酮二胺(IPDA)为原料合成溶剂型聚氨酯脲(PUU)树脂,通过改变PPG600和PPG2000配比调节树脂硬段含量。
3.
A novel polyurethane-urea emulsion was synthesized through different methods from poly(propylene oxide)diol,toluene diisocyanate,dimethylol propionic acid,2-methyl-1,3-propane diol,ethylenediamine and diethylene triamine.
以聚氧化丙烯二元醇为软段,甲苯二异氰酸酯、二羟甲基丙酸、2—甲基—1,3—丙二醇、乙二胺和二乙烯三胺为硬段,通过不同的方法合成了一种新型的自乳化型聚氨酯脲乳液(APu)。
4)  polyurethane(urea)
聚氨酯(脲)
5)  poly(urea-urethane)s
聚脲氨酯
1.
Study on synthesis and its properties of chitin-based poly(urea-urethane)s;
甲壳素型聚脲氨酯的合成与性能研究
6)  PUU
聚氨酯脲
1.
Study of Catalyst Effect on the PUU Cure Kinetics by Using FTIR;
FTIR法研究催化剂对聚氨酯脲固化过程的催化作用
2.
Development of Morphology and Mechanical Properties in Polyurethane-urea(PUU) Curing Process;
聚氨酯脲(PUU)固化过程中形态及力学性能的变化
补充资料:乙烯类聚氨酯乳液胶黏剂
分子式:
CAS号:

性质:应用异氰酸酯与含羟基的聚合物的交联反应制成的水基乙烯类聚氨酯胶黏剂。如MDI的疏水性溶剂溶液与聚乙烯醇和合成橡胶胶乳,醋酸乙烯乳液等混合乳化,提高胶的耐水性、粘接性、耐热性。用于粘接木材时,水分蒸发,异氰酸酯与聚乙烯醇反应而交联。其特点是具有与酚醛树脂相当的耐水粘接力,初黏力高,胶中性不污染木材。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条