1) particle nucleation
粒子成核
1.
The paper introduces the different particle nucleation mechanism of monomer-swollen micelle,aqueous phases,monomer droplets,in the emulsion polymerization,discusses the effects of the rate of radical generation,the concentration of emulsifier,polymerizing methods,etc.
介绍了乳液聚合中胶束,均相和单体液滴三种不同的粒子成核机理。
2) nucleation of the second-phase particles
第二相粒子成核
3) core-shell particles
核壳粒子
1.
Preparation and characterization of nano-Ag /PS core-shell particles;
纳米银/聚苯乙烯核壳粒子的制备与表征
2.
P(APU-BA)/PMMA core-shell particles were prepared by polymerization of self-made acrylate polyurethane(APU) and seed emulsion.
采用自制的丙烯酸酯化聚氨酯(APU)和种子乳液聚合的方法,制备了一种P(APU-BA)/PMMA型的核壳粒子。
3.
Layer-by-layer (LbL) assembled core-shell particles are currently studied immensely due to their advantages of tailored dimensions and compositions.
本文综述了基于层层自组装和胶体模板以及采用各种化学和物理方法直接除去核制备磁性复合核壳粒子和空腔球体。
4) core-shell particle
核-壳粒子
1.
Synthesis and optic character of TiO_2/Fe_2O_3 core-shell particles;
TiO_2/Fe_2O_3核-壳粒子的制备及光学性能
2.
The Fe_2O_3-SiO_2 core-shell particles were synthesized through the hydrolysis of TEOS in the pseudo-sphericalα-Fe_2O_3 suspensions catalyzed by ammonia and urea.
应用TEM、XRD对Fe_2O_3-SiO_2核-壳粒子结构进行了测定。
3.
Silver-coated glass microsphere core-shell particles were prepared by silver (Ag) electroless plating on the self-assembly monolayer technique.
采用自组装化学镀银技术制备了银包玻璃微珠核-壳粒子,并且运用X射线衍射仪、扫描电镜和电子能谱仪等对该核-壳粒子的物相和形貌等进行了表征。
5) core-shell particle
核壳粒子
1.
Preparation and characterization of TiO_2/PBA/PMMA core-shell particles;
TiO_2/PBA/PMMA核壳粒子的制备与表征
2.
Late-transition metal catalyst Fe(Ⅱ) was supported on core-shell particle synthesized in-situ by emulsion polymerization,where SiO2 served as core and PSAm served as shell.
采用乳液聚合法原位合成以无机物SiO2为核、苯乙烯-丙烯酰胺共聚物(PSAm)为有机/无机壳的核壳粒子,并负载Fe(Ⅱ)后过渡金属催化剂,并考察了PSAm/SiO2核壳载体制备过程中搅拌速率、乳化剂用量等对反应的影响,采用扫描电镜(SEM)、偏关显微镜(PLM)、红外光谱(FTIR)等分析方法对PSAm/SiO2核壳载体进行了表征。
3.
Research progress of polysiloxane core-shell particles in recent years was reviewed.
综述了近几年聚硅氧烷核壳粒子的研究进展。
6) Core shell particle
核壳粒子
1.
Toughening agents, such as, thermoplastic resins, core shell particles, liquid crystalline polymers, inorganic particles were mentioned.
利用非弹性体可以使一些韧性较差的高分子材料达到有效增韧的目的 ,从热塑性塑料增韧体系、核壳粒子增韧体系、液晶高聚物增韧体系及无机刚性粒子增韧体系等方面分别进行了概述。
2.
As last, the core shell particles were applied into polycarbonate(PC).
并将核壳粒子产物用于改性聚碳酸酯 (PC) ,其效果十分显著。
补充资料：初级粒子和原级粒子
分子式：
CAS号：
性质：又称初级粒子和原级粒子。利用各种化学反应方法得到的最初粒子(晶粒)。一次粒子的大小约为0.005～1μm，比筛分的极限小得多，在介质中有相当高的稳定性。
CAS号：
性质：又称初级粒子和原级粒子。利用各种化学反应方法得到的最初粒子(晶粒)。一次粒子的大小约为0.005～1μm，比筛分的极限小得多，在介质中有相当高的稳定性。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条