说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 陶瓷内衬
1)  ceramic lined
陶瓷内衬
1.
XRD,SEM and EDX are used to study effect of Na 2B 4O 7 additive on structure and properties of ceramic lined pipes produced by centifugal SHS process.
利用 XRD、SEM、EDX等方法 ,研究了 Na2 B4O7添加剂对离心 SHS陶瓷内衬复合钢管结构及性能的影响。
2.
It was tested that the heat insulated property of the ceramic lined cast iron tube fabricated by SHS-gravity separating process for Al-Fe_2O_3 system.
主要测试和讨论Al-Fe2O3系SHS-重力分离法制备的陶瓷内衬灰铁管的隔热性能。
2)  lined ceramics
内衬陶瓷
1.
Influences of iron oxide powder chemical composition on synthesizing lined ceramics of SHS curved composite pipes;
氧化铁粉末化学组成对合成SHS复合弯管内衬陶瓷的影响
3)  ceramic-lined layer
内衬陶瓷层
1.
Based on gravitational separation self-propagating high-temperature synthesis (SHS) process of Al-Fe2O3-CrO3-TiO2-C system, a new type of FeO-TiC-Al2O3-CrO ceramic-lined composite pipe was produced, the ceramic-lined layer of which is smooth, compact and uniform.
基于重力分离自蔓延过程,Al-Fe2O3-CrO3-TiO2-C燃烧体系,制备出了一种新型的FeO-TiC-Al2O3-CrO陶瓷内衬钢管,其内衬陶瓷层厚度均匀、致密、表面光滑。
4)  Ceramic-lined pipe
陶瓷内衬管
5)  ceramic-lined composite pipes
陶瓷内衬复合管
1.
Influences of pre-coating technique on interface of ceramic-lined composite pipes fabricated by the SHS process;
预涂覆工艺对SHS陶瓷内衬复合管界面的影响
2.
Influences of metallic additive on microstructures and interface-bonding of ceramic-lined composite pipes fabricated by the SHS process;
金属添加剂对SHS陶瓷内衬复合管微观结构与界面连接的影响
3.
On the basis of using gravitational separation SHS process to produce ceramic-lined composite pipes, the influence of Ni content on combustion characteristics and mechanical properties is investigated.
采用SHS重力分离技术制备陶瓷内衬复合管,通过改变主燃烧配系组元Ni的含量,研究分析了金属Ni对陶瓷内衬复合管制备的燃烧特性及机械性能的影响。
6)  metal-base ceramics
金属基陶瓷内衬
补充资料:衬经衬纬圆纬机
      用以编织衬经衬纬针织物的圆型纬编针织机。它在编织平针组织的同时,衬入不参加成圈的经纱和纬纱,形成衬经衬纬针织物。其基本组织结构如图1所示。 这种针织物的纵向和横向的延伸度都较小,具有机织物的特性,除适合做各种外衣外,还可作灌溉用涂塑管道的骨架。在衬经衬纬圆纬机上,有三组纱线:衬经纱、衬纬纱、成圈纱参加编织。其编织机构如图2所示。
  机器的针筒固定在台面上,三角座相对于针筒回转。衬经纱从固定的纱架上引出,通过分经盘(或导经片)由上而下经过针间衬入织物线圈纵行间。所有衬经纱从针筒口向外倾斜一定角度,形成圆锥面,便于成圈纱的喂入。衬纬纱筒子架位于衬经纱外侧,与三角座一起回转,通过导纬器将纬纱衬入针背与经纱之间,依次横向搁在针上的旧线圈上方。成圈纱筒子架位于衬经纱内侧,与三角座同步回转。导纱器处于织针与衬经纱之间,把成圈纱喂入针钩内编织成圈,形成平针组织,同时,使其线圈的沉降弧从内侧包住衬经纱,圈柱从外侧包住衬纬纱,从而使三组纱线结合在一起,形成一种基本的衬经衬纬针织物。  衬经衬纬针织物用于外衣产品时,由于衬经纱和衬纬纱之间没有交织点,易于拱出,因此,需改变其组织结构。例如,通过导经片将衬经纱在针头上绕一圈,并把它向下转移到旧线圈处,再和旧线圈一起向上套圈,使衬经纱与成圈纱结合得更紧密。另外,适当加粗衬纬纱,也可提高衬经衬纬针织物的结构稳定性。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条