1) poly (ethylene terephthalate)-polyethylene glycol
聚对苯二甲酸乙二酯-聚乙二醇
2) Poly(ethylene terephthalate)
聚对苯二甲酸乙二醇酯
1.
Poly(ethylene terephthalate)(PET)and PA5935 were blended in a high speed mixer,and then injected into specimense.
将聚对苯二甲酸乙二醇酯(PET)与PA5935高速共混,注射制样,样品的热性能、力学性能、阻燃性能和流变性能等测试结果表明,在PET中加入少量PA5935改善了PET抗熔滴性能与炭化性能,但结晶度、氧指数和部分力学性能下降。
2.
The immiscible poly(ethylene terephthalate)(PET)/polypropylene(PP)blend was prepared by melt mixing and its structural rheology was studied.
通过熔融共混制备了不相容的聚对苯二甲酸乙二醇酯(PET)/聚丙烯(PP)复合体系,研究了复合体系的结构流变学。
3.
The feasibility of in-situ microfibrillar method on recycling poly(ethylene terephthalate)(PET) and high-density polyethylene(HDPE) mixtures was carried out by four repetitive extrusion.
研究了原位微纤化方法在回收聚对苯二甲酸乙二醇酯(PET)和高密度聚乙烯(HDPE)混合物方面的应用。
3) PET
[英][pet] [美][pɛt]
聚对苯二甲酸乙二醇酯
1.
Interaction Parameters of the PET/PC and PET/Phenoxy Resin Blends;
聚对苯二甲酸乙二醇酯与聚碳酸酯及聚酚氧树脂间的相互作用参数
2.
Preparation of PET/MWNTs Nano Composite by Covalent Grafting;
多壁碳纳米管与聚对苯二甲酸乙二醇酯的接枝聚合
3.
The grafting product was used as the reactive compatibilizer of HDPE/PET blend and the influences of the compatibilizer on mechanical properties, thermostimulative shape memory function of blends were discussed.
结果表明:采用GMA/St双组分单体具有较高的接枝率,生成的接枝物对HDPE/聚对苯二甲酸乙二醇酯(PET)共混合金的增容效果较好;提高了体系的力学性能和热致形状记忆性能,且HDPE-g-(GMA-co-St)含量为5～10phr时,合金具有较好的综合性能。
4) Poly (ethylene terephthalate)
聚对苯二甲酸乙二醇酯
1.
The research on poly (ethylene terephthalate)/polycarbonate alloy was reviewed.
评述了近年来聚对苯二甲酸乙二醇酯(PET)/ 聚碳酸酯(PC)合金研究的最新工作,着重讨论了 PET/PC 合金酯交换与相容性的关系、第三组分增容 PET/PC、PET/PC 体系的结晶行为以及 PET/PC 合金的应用4个方面,并对 PET/PC 共混物的发展方向进行了展望。
5) polyethylene terephthalate
聚对苯二甲酸乙二醇酯
1.
Research progress in synthesis of polyethylene terephthalate;
聚对苯二甲酸乙二醇酯合成的研究进展
2.
Study on blood compatibility of polyethylene terephthalate (PET) modified by plasma surface grafting;
等离子体表面接枝改性聚对苯二甲酸乙二醇酯的血液相容性研究
3.
The ultrasonic extraction technique of oligomers from polyethylene terephthalate (PET) was studied by orthogonal test.
采用正交实验法研究了超声波提取聚对苯二甲酸乙二醇酯(PET)中的齐聚物的工艺,考察了萃取的溶剂种类及其用量、萃取时间和次数对齐取物萃取的影响。
6) polyethyleneterephthalate
聚乙二醇对苯二甲酸酯
补充资料：二乙二醇双氯甲酸酯
分子式：C6H8Cl2O5
分子量：231.0322
CAS号：106-75-2
性质：暂无
制备方法：暂无
用途：暂无
分子量：231.0322
CAS号：106-75-2
性质：暂无
制备方法：暂无
用途：暂无
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条