1) High Purity Antimony trioxide
高纯三氧化二锑
2) high purity Bi 2O 3
高纯三氧化二铋
3) antimony trioxide
三氧化二锑
1.
Preparation of antimony trioxide from antimony-rich lead anode slime;
利用高锑铅阳极泥制备三氧化二锑的工艺研究
2.
The catalytic antimony trioxide with low impurity;
低杂质催化剂三氧化二锑
3.
Evaluation of catalytic activity of antimony trioxide(Sb_2O_3) in polycondensation;
三氧化二锑对缩聚反应的催化活性的评价
4) Sb_2O_3
三氧化二锑
1.
The effects of various composite flame retardants,such as Al(OH)_3,Al(OH)_3/Sb_2O_3,and Al(OH)_3/Mg(OH)_2,on the flame-retardance and physical properties of EPDM were investigated.
研究了氢氧化铝,氢氧化铝/三氧化二锑复配,氢氧化铝/氢氧化镁复配对EPDM硫化胶阻燃性能和力学性能的影响。
2.
The nano-sized antimony trioxides(NSb_2O_3) were modified by in situ polymerization of styrene(St) and in situ copolymerization of vinyl silane(VS) and St,respectively,and then compounded with high impact polystyrene(HIPS) in molten state.
本研究分别采用纳米三氧化二锑/苯乙烯(St)原位聚合和纳米三氧化二锑/乙烯基三乙氧基硅烷/苯乙烯原位共聚合处理纳米三氧化二锑(NSb2O3)表面,以促进NSb2O3在高抗冲聚苯乙烯(HIPS)中的分散。
3.
It prepared the flame-retardant PP by use of the new type of composite flame retardant DBDPE/Sb_2O_3, and studied the synergistic effect of DBDPE and Sb_2O_3, the effects of composite flame retardant on PP,involving fire resistance,physical and mechanical properties,and explained the flame retardant mechanism.
采用新型阻燃剂十溴二苯乙烷(DBDPE)与三氧化二锑(Sb2O3)复合对PP进行阻燃改性,研究了DB DPE与Sb2O3的协同效应,复合阻燃剂对PP阻燃性能、物理机械性能的影响及其阻燃机理。
5) antimonous oxide
三氧化二锑
1.
The effect of the primary flame retardant magnesium hydroxide [Mg(OH)_2] combined with decabromo diphenylethane(DBDPE)/antimonous oxide(Sb_2O_3)/ingredient A——a polymerized organo-silicone on the properties of EPDM/PP TPV was investigated.
采用氢氧化镁为主阻燃剂,配合使用十溴二苯乙烷(DBDPE)、三氧化二锑和配合剂A(一种有机硅高分子材料),研究四者对EPDM/PP热塑性硫化胶(EPDM/PPTPV)性能的影响。
2.
The effect of decabromodiphenyl oxide, decabromodiphenyl oxide/antimonous oxide and decabromodiphenyl oxide/red phosphorus on EPDM/PP was studied by determinating the mechanical and flame-retardant properties.
用氧指数测定和力学性能测定方法研究了十溴二苯醚(FR 10)及其与三氧化二锑(Sb2O3)、红磷配合使用对三元乙丙橡胶(EPDM)/聚丙烯(PP)阻燃性能和力学性能的影响。
6) Sb 2O 3
三氧化二锑
1.
Polybutylene terphthalate (PBT) was flame retarded by using composite flame retardant DBDPE/Sb 2O 3, and the effect of DBDPE/Sb 2O 3 on the retardant properties, thermal stability and mechanical properties of PBT, as well as the mechanism of the flame retardancy, was discussed.
以十溴二苯乙烷 (DBDPE)和三氧化二锑 (Sb2 O3 )作为复合阻燃剂 ,对聚对苯二甲酸丁二醇酯 (PBT)进行改性。
2.
The effects of flame-retardants,which were Al(OH) 3 ,the blend of Al(OH) 3/Sb 2O 3 ,the blend of Al(OH) 3/MoO 3 ,on the flame-retarded properties of heat vulcanized (HTV)silicone rubber were studied,respectively,trying to seek the balance between the mechanical properties and flame-retarded properties.
研究了氢氧化铝、氢氧化铝 /三氧化二锑并用、氢氧化铝 /三氧化钼并用对热硫化 (HTV)硅橡胶阻燃性能和力学性能的影响 ;试图在力学性能与阻燃性能之间寻找平衡。
3.
The synthetic method of antinomy glycolate from Sb 2O 3 and excess HOC 2H 4OH with benzene as water carrying agent was studied by orthogonal experiment design.
以过量的乙二醇与三氧化二锑进行脱水反应 ,用苯为带水剂将生成的水带出 ,反应产物通过定性分析证明为乙二醇锑。
补充资料：高纯三甲基锑
分子式：(CH3)3Sb
CAS号：
性质：熔点-87.6℃，沸点80.6℃，密度1.528g/cm3。纯度≥99.999％。采用精密精馏和配位体置换技术提纯。自燃，对空气、水十分敏感。在室温下贮存稳定，在500～700℃条件下容易分解。用于生长InSb，也作为硅器件的掺杂源。
CAS号：
性质：熔点-87.6℃，沸点80.6℃，密度1.528g/cm3。纯度≥99.999％。采用精密精馏和配位体置换技术提纯。自燃，对空气、水十分敏感。在室温下贮存稳定，在500～700℃条件下容易分解。用于生长InSb，也作为硅器件的掺杂源。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条