1) swirlling intensity
族流强度
2) Heat flow strength
热流强度
1.
It has been applied to the quantitative analysis of the relationships between the heat flow strength and the thicknesses of hearth wall and slag skull.
建立了高炉炉缸传热的数学模型，这一模型可精确地分析热流强度与炉墙及渣皮厚度之间的定量关系。
3) swirl intensity
旋流强度
1.
The effect of swirl intensity on flame features,temperature field and formation characteristics of NOx in gas stove was studied by means of gas stove and analytical instruments for flue gas.
采用燃气实验炉和综合烟气分析仪等设备,研究了旋流强度对平焰燃气炉内火焰特性、温度场和烟气中NOx生成特性的影响规律。
2.
Effects of air swirl intensity on atomization and combustion performance of effervescent atomized spray were investigated under different conditions.
对不同空气旋流强度下气泡雾化喷嘴出口下游喷雾流场特性及燃烧特行进行了诊断与分析。
3.
In order to use low caloric value and components variable exhaust gas and raw gas from polygeneration system,a swirl premixed burner,whose swirl intensity is adjustable,was designed to obtain a highly efficient,less polluted and stable combustion.
针对多联产系统中热值较低、成份可变的弛放气和粗煤气的燃烧利用,设计了可调旋流强度预混合燃烧器来获得弛放气和粗煤气的高效、低污染稳定燃烧。
4) current intensity
电流强度
1.
The influencing factors on treatment effects include:current density(current intensity or current voltage) , pH,last.
首先,研究了电解机理,电解作用有4种:絮凝作用、浮选作用、直接氧化还原作用、间接氧化还原作用;然后,研究了影响处理效果的因素,这些因素主要包括:电流密度(电流强度或电压)、pH值、电解时间、电解质投加量、极板间距等。
2.
the optimized process parameters of silver electrolysis production,and achievements and existing problems in improving current intensity in silver electrolysis production in Rare and precious metals factory of Yunnan Copper Co.
介绍了云铜股份公司稀贵分厂在银电解生产中优化工艺参数,提高银电解生产电流强度取得的成果和存在的问题。
5) thermal flow intensity
热流强度
1.
The corrosion of hearth bottom is obtained, the thermal flow intensity of cooling stave is lowed, the cracked flow of furnace bosh is reduced, the long campaign is obtained.
通过设立护炉小组,强化管理,优化高炉操作制度,采用炉底穿管、炉外喷水、安装冷却棒、缩小铁口角度、加钒钛矿、炉体灌浆、炉内喷补等操作技术,有效地延缓了炉缸炉底的侵蚀,遏制了冷却壁热流强度升高的态势,减少了炉腹炉腰的开裂变形,实现了稳定顺行生产,延长了高炉寿命。
2.
(SMMC)in recent more than 4 years, author indicated that when thermal flow intensity of hearth is larger and erosion of hearth lining is serious at the last stage of campaign, adding V-Ti bearing materials to hearth and carrying out relative measures are necessary to maintain higher production under safe operation of blast furnace.
梅山高炉四年多维护炉缸的实践表明，在炉役后期，当炉缸侵蚀严重，热流强度较高时，由于坚持添加钒钛物料，并辅之以与其配套的维护炉缸的相关技术措施，在高炉安全运行的情况下，维持了较高的生产水平，做到不减产或少减产，使高产与长寿在精心维护好炉缸的前提下达到统一。
6) current density
电流强度
1.
The results show that the grain size decrease and the mechanical properties enhance with the increase in current density.
研究了脉冲电流强度对ZA12合金凝固组织的影响。
补充资料：表光合强度(见光合强度)
表光合强度(见光合强度)
forecast of sowing or transplanting time
b iaoguanghe qiangdu表光合强度见光合强度
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条