说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 螺杆填充率
1)  Screw fill ratio
螺杆填充率
2)  auger filler
螺杆式充填机
3)  filling rod
充填杆
4)  media-filling rate
填料填充率
1.
The influence of air-water ratio,HRT(hydraulic retention time),media-filling rate for biological contact oxidation tank and dosage of flocculating agent,surface loading for flotation tank on pollutants removal was studied.
开展了生物接触氧化/气浮工艺处理微污染源水的中试研究(规模为20 m3/h),考察了生物接触氧化池的气水比、水力停留时间、悬浮生物填料填充率和气浮池混凝剂投加量、表面负荷对污染物去除效果的影响。
5)  Filling rate
填充率
1.
Under the condition of DO of 4 to 5 mg/L in HSMBR and HRT of 4 h,the COD removal rate is 75%,62% and 56% respectively when the carrier filling rate.
在HSMBR中的溶解氧浓度为4~5mg/L、HRT为4h的条件下,当填料填充率分别为45%、20%和0时,系统对COD的去除率分别为75%、62%和56%;对NH3-N的去除率>90%;膜清洗周期分别为40、36和24d。
2.
The elongation and filling rate have been selected and the tensional coefficient has been calibrated systematically on the bases of the rolling law.
根据轧制规律,选用合理的延伸系数和填充率,系统地校核了张力系数,减少了断锭堆料事故,改善和提高了铝杆的力学性能,延长了轧辊使用寿命,降低了产品的制造成本。
3.
In order to model the estimation for the over-sample and sub-pixel imaging considering the detector s filling rate,the detector pixel spread function is derived adversely by the sub-pixel arithmetic.
针对探测器存在填充率时过采样和亚像元成像质量评价问题,利用亚像元算法反演线阵探测器像元扩散函数,发现较过采样成像不仅能在1/m微扫描作用下减小采样间隔,还能使探测器矩形窗口压缩m倍。
6)  filling ratio
充填率
1.
As a result,the manipulate conditions were determined of the steel ball medium filling ratio and original ratio,grinding production and concentration,and compared with the energy saving on several type mill.
4m加长非标型球磨机的基本参数,确定了钢球充填率、原始配比、给矿速度、磨矿浓度等操作条件,并对耗能进行了对比,指出下一步应改进之处。
补充资料:填充离子交换树脂的电渗析器、电渗析填充床等
分子式:
CAS号:

性质:又称填充离子交换树脂的电渗析器、电渗析填充床等。这是将离子交换树脂充填入电渗析器隔室中,将电渗析与离子交换树脂结合一起的一种脱盐方法。这种装置可以提高脱盐室的电导,并能有效地防止极化沉淀以制备高纯水。但其结构比较复杂,拆装不便。其工作原理为:将H+,OH-型阳、阴树脂予混后填充入电渗析器脱盐室。在直流电场作用下,阴、阳树脂与溶液中的阴、阳离子进行交换。之后,由于电解再生,树脂分别又转为H+,OH-型,解吸的阴、阳离子分别通过阴、阳膜进入浓缩隔室。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条