1) generalized hybrid finite element for shells
广义杂交壳单元
2) generalized hybrid degenerated shell element
广义杂交退化壳
1.
According to a generalized variational principle, which relaxes the inter element continuity requirements, a generalized hybrid degenerated shell element was first formulated by introducing incompatible modes.
依据一个在局部坐标系下放松单元间连续性要求的广义变分原理，建立了基于非协调模式的几何非线性广义杂交退化壳单元。
3) generalized hybrid/mixed element
广义杂交/混合有限元
4) nonlinear generalized hybrid element
非线性广义杂交元
5) generalized element
广义单元
1.
The second topic is: the definition of generalized element,namely,.
基于广义单元概念,发展了一种无网格-有限元耦合的新方法,即无网格-有限元直接耦合法。
6) hybrid single element
杂交单元
1.
y the use of Hellinger-Reissuer variation functional the authors present a hybrid singleelement model of multi-layer thin sheets and have made an analytical computation of the characteristics of built-up laminated sheets based on the use of hybrid single elements in the presence of transverse displacements.
组合层板在横向位移时的特性研究王心丰，方鸿慧（南京航空航天大学）［摘要］用Ｈｅｌｌｉｎｇｅｒ—Ｒｅｉｓｓｎｅｒ变分泛函导出了多层薄板的杂交单元模型。
补充资料：ANSYS壳单元分析箱梁
! Analysis a box beam section with shell elements of ANSYS
! 用ansys的壳体单元分析箱梁
! Box dimension: 10*4*4m with shell thickness of 0.04m
! By Lu Xinzheng, Depart. Civil Engineering, Tsinghua University, Beijing
! 陆新征，清华大学土木系
! Aug. 2004
! Define the Element
! 定义单元
/PREP7
!*
ET,1,SHELL93
!*
! Define the section for shells
! 定义壳单元截面
R,1,.04, , , , , ,
!*
! Define the material
! 定义材料
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,200e9
MPDATA,PRXY,1,,.3
! Setup the model
! 建模
! Define the keypoints
! 定义关键点
k,1,0,0,0
k,2,4,0,0
k,3,4,4,0
k,4,0,4,0
! Define the lines
! 定义线
l,1,2
l,2,3
l,3,4
l,4,1
! Define the section area
! 定义截面
a,1,2,3,4
! 用ansys的壳体单元分析箱梁
! Box dimension: 10*4*4m with shell thickness of 0.04m
! By Lu Xinzheng, Depart. Civil Engineering, Tsinghua University, Beijing
! 陆新征，清华大学土木系
! Aug. 2004
! Define the Element
! 定义单元
/PREP7
!*
ET,1,SHELL93
!*
! Define the section for shells
! 定义壳单元截面
R,1,.04, , , , , ,
!*
! Define the material
! 定义材料
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,200e9
MPDATA,PRXY,1,,.3
! Setup the model
! 建模
! Define the keypoints
! 定义关键点
k,1,0,0,0
k,2,4,0,0
k,3,4,4,0
k,4,0,4,0
! Define the lines
! 定义线
l,1,2
l,2,3
l,3,4
l,4,1
! Define the section area
! 定义截面
a,1,2,3,4
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条