1) joined tie-bar
组合拉杆
1.
The design of the injection mold of multiple points,plates and molded surfaces is simplified by using lock catch facility ,joined tie-bar structure and decreasing the guide-pin amount.
应用锁扣装置、组合拉杆结构,减少导柱数量,简化了多点多板多分型面注塑模具的设计。
2) Screw Assemble
螺杆组合
1.
The effect of carbon fiber length distribution in the composite on its mechanical properties by optimizing screw assemble is studied and the wear behaviors are tested on a MM200 wear machine.
通过优化螺杆组合,研究了CFRPA复合材料中碳纤维的长度分布对其力学性能的影响,用MM—200磨损试验机测试了CFRPA复合材料的磨损性能。
3) screw configuration
螺杆组合
1.
The normal screw combination components of co-rotating twin screw extruder are presented,and the screw configuration is optimized.
介绍啮合同向双螺杆挤出机的常用螺杆组合元件并对螺杆组合进行优化,研究了不同螺杆组合和加料工艺对改性(丙烯腈/丁二烯/苯乙烯)共聚物(ABS)力学性能的影响,并设计出适合于改性ABS加工的螺杆组合及加料工艺。
2.
The effect of screw configuration on the dispersed particle size and its distribution in polymer blends prepared by co-rotating twin-screw extruder using different configurations was studied.
采用啮合同向双螺杆挤出机不同的螺杆组合形式,研究了熔融塑化区中捏合段数量对双螺杆挤出聚合物共混物表层和内层分散相粒子粒径及其分布的影响。
3.
The influence of screw configuration of melting section on the morphology changes of model polymer blends HOPE/PS in a co-rotating twin screw extruder was experimentally investigated.
研究了双螺杆熔融段不同螺杆组合对模型聚合物共混体系HDPE/PS相态变化的影响。
4) screw assemblies
组合螺杆
1.
Three-dimensional isothermal flows of polymer melt in the screw assemblies of a modular intermeshing co-rotating twin-screw extruder ZSK60 were simulated using the polymer flow analysis package POLYFLOW.
采用聚合物流动分析软件POLYFLOW,数值模拟了聚合物熔体在组合式啮合同向双螺杆挤出机ZSK60的组合螺杆中的三维等温流动。
5) truss bolting
组合锚杆
1.
in the recent years truss bolting technique has been applied and developed in mining roadways, aiming at improvement of gateway support, maintenance, reduction of support costs, simplifying maintenance of support at the face ends and increased machine availability.
最近几年，在我国的回采巷道中组合锚杆支护技术得到了应用和发展，其目的旨在改善回采巷道维护状况，降低支护成本，简化回采工作面端头区维护工序，提高工作面开机率。
6) grouped arbor
组合刀杆
1.
For the analysis of large-diameter deep-hole screw thread,especially the cutting of single or multiple square tooth screw thread,we have designed a suit of grouped arbor for avoiding causing the median diameter of large-diameter deep-hole screw thread to the angle of taper.
对大直径深孔螺纹,特别是车单头或多头方牙螺纹的加工进行了分析,为了避免造成大直径深孔螺纹的中径成为锥度,设计了一套组合刀杆。
补充资料：组合模式或组合振动
分子式：
CAS号：
性质：在红外光谱中通常出现很多的弱吸收，组合模式或组合振动系指对应于两个或多个基本振动频率之和起源，它的弱吸收于多原子分子振动态相互作用的振子的非谐性。与基频振动及倍频所引起的吸收相比，这些吸收是比较弱的。
CAS号：
性质：在红外光谱中通常出现很多的弱吸收，组合模式或组合振动系指对应于两个或多个基本振动频率之和起源，它的弱吸收于多原子分子振动态相互作用的振子的非谐性。与基频振动及倍频所引起的吸收相比，这些吸收是比较弱的。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条