1) ast iron
铸铁合金
1.
The microstructure solidified under different thermal conditions and its effects on mechanical properties of cast iron have been studied.
研究了亚共晶、过共晶铸铁合金液在不同热状态下的凝固组织，以及组织对力学性能的影响等。
2) alloy cast iron
合金铸铁
1.
Development of alloy cast iron standard materials for spectral analysis;
合金铸铁光谱分析用标准物质的研制
2.
The Cu-Ni alloy cast irons of different chemical constitution were designed,and the corrosion rate in room-temperature concentrated alkaline solution was measured by the static hydrometer method,the microscopics and phase composition of alloy cast iron were observed by optical microscope and XRD.
设计了不同成分的铜镍合金铸铁,并用静态失重法测定其在室温浓碱液中的腐蚀速率,借助光学显微镜和X射线衍射仪分析了显微组织和相组成。
3.
The corrosion rates of Cu-Ni alloy cast irons in hot concentrated alkaline solution were measured by dynamic condition hydrometer method,the microscopic structures and surface corrosion topographies of alloy cast irons were observed by the optical microscope and SEM,the components were analyzed by XES.
采用动态失重法测定铜镍合金铸铁在高温浓碱液中的腐蚀速度,借助光学显微镜和扫描电镜观察显微组织和表面腐蚀形貌,利用能谱仪分析表面微区成分。
3) alloy cast-iron
合金铸铁
1.
To study high-speed machining process of alloy cast-iron, a finite ele ment model (FEM) is built.
为深入研究合金铸铁的高速切削机理,建立了高速切削的有限元模型,对高速铣削合金铸铁时的锯齿状切屑形成过程进行了仿真分析,获得了切削参数对锯齿状切屑形成的影响规律,为优化切削参数、提高刀具寿命和加工表面质量提供了参考依据。
4) Tungsten alloy cast iron
钨合金铸铁
1.
Studies the possibility on improving trursmutative soil service life based on the tungsten alloy cast iron liner which was made from tungsten slag alloy.
以钨渣铁合金为主要合金原料制造钨合金铸铁衬板 ,研究了稀土变质处理提高其使用寿命的可能性。
5) low alloy cast iron
低合金铸铁
1.
The paper studied the effects of hardening temperature on CrMoCu low alloy cast iron.
研究了淬火温度对CrMoCu低合金铸铁硬度的影响 ,发现铬促进铸铁中出现独立的合金碳化物而不利于基体硬度的提高 ,较高的硅量也会降低铸铁的淬后硬度。
6) Molten Iron
铸铁合金液
1.
Factors Influencing Mold Filling Capacity of Molten Iron in Vacuum EPC V;
负压消失模铸造铸铁合金液充填性能及影响因素
补充资料：合金铸铁
在普通铸铁中加入合金元素而具有特殊性能的铸铁。通常加入的合金元素有硅、锰、磷、镍、铬、钼、铜、铝、硼、钒、钛、锑、锡等。合金铸铁根据合金元素的加入量分为低合金铸铁 (合金元素含量＜3％)、中合金铸铁（合金元素含量为 3～10％）和高合金铸铁（合金元素含量＞10％）。合金元素能使铸铁基体组织发生变化，从而使铸铁获得特殊的耐热、耐磨、耐腐蚀、无磁和耐低温等物理-化学性能,因此这种铸铁也叫"特殊性能铸铁"。合金铸铁广泛用于机器制造、冶金矿山、化工、仪表工业以及冷冻技术等部门。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条