说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 羧基丁幕胶乳
1)  carboxylated butadiene-styrene rubber latex
羧基丁幕胶乳
1.
On the respective experimental ,pilot and commercial scales , the high solid content carboxylated butadiene-styrene rubber latex for carpet foam-backing coating was synthesized by the batch process in low-soap emulsion polymerization with multi- feeding at elevated temperature and high conversion of monomer .
高转化下,采用分批间歇加料方式合成了地毯海绵背衬用高固羧基丁幕胶乳,考察了乳化剂,引发剂、羧酸和调节剂等对聚合反应的影响。
2)  carboxylated styrene butadiene latex
羧基丁苯胶乳
1.
Nylon short fiber grafted rubber composites was prepared when short fiber pretreated with γ -methacryloxy propyl trimethoxy silane(A 174) or γ -amino propyl triethoxy silane(A 1100) was soaked in carboxylated styrene butadiene latex for 10 min , then was kept in an oven at 110 ℃ for 90 min .
将用γ-(甲基丙烯酰氧基)丙基三甲氧基硅烷(A174)或γ-氨丙基三乙氧基硅烷(A1100)处理后的尼龙短纤维分别加入到特软羧基丁苯胶乳中,浸泡10min后于110℃烘箱中干燥90min,可制备尼龙短纤维接枝橡胶复合材料。
2.
Two methods were used to analyze the distribution of carboxylated styrene butadiene latex in the coating layer,one is energy dispersive X ray spectrometer,the other is backscattered electron(BSE) imaging after treating the sample by standard metallographic techniques.
运用两种方法对经溴标记的涂布纸中羧基丁苯胶乳在涂层内的分布进行了检测。
3)  carboxylated styrene-butadiene latex
羧基丁苯胶乳
1.
Research on freeze-thaw stability of carboxylated styrene-butadiene latex;
羧基丁苯胶乳冻融稳定性研究
2.
Physical and chemical behavior of YH-05, Dow-675, SD-656 carboxylated styrene-butadiene latex in paper coating are discussed.
讨论了羧基丁苯胶乳物化性能对铜版纸涂布性能的影响,对比了YH-05、Dow-675、SD-656三种羧基丁苯胶乳的成纸性能。
3.
The indexes of domestic carboxylated styrene-butadiene latex for paper coating were compared and the imported latexes used in paper coating were analyzed.
对比了现有国内生产造纸用羧基丁苯胶乳的各项指标 ,剖析了国内高速涂布纸生产厂家所用的进口胶乳 ;探讨了高速涂布纸用胶乳的性能要求 ,确定小粒径、良好的机械稳定性和化学稳定性是高速涂布纸用胶乳的重要特点。
4)  CPSBRL
羧基丁苯吡胶乳
1.
Study on Preparation and Properties of CPSBRL;
羧基丁苯吡胶乳的合成及其性能研究
5)  carboxylated styrene-butadiene rubber latex
羧基丁苯胶乳
1.
By means of the enlargement rules and the test data for the carboxylated styrene-butadiene rubber latex(XSBRL)polymerization reactor proposed from the experiments in pilot plant and demonstration plant, the reactors used in the commercial production were designed, and the heat transfer in the react ors and the question in enlarging the styrene devolatilizer of latex were researched.
利用羧基丁苯胶乳中试和工业试验提出的聚合釜的放大规律和试验数据,以工业化为目标,分析了聚合釜的传热和脱气釜的放大问题,比较了20m3、30m3聚合釜放大的技术成熟性和两种结构不同的脱气釜的脱气性能。
2.
The enlargement rules of polymerization reactor for the synthesis of carboxylated styrene-butadiene rubber latex was studied based on the features of its synthesis process,homogeneous nucleation of emulsion and low-soap polymerization by the experiments on cold model and commercial plant.
根据羧基丁苯胶乳合成工艺的特点、乳液均相成核机理和低皂聚合原理,拟定了设计聚合釜的放大规律应遵循的依据。
3.
The effects of agitation power, agitation speed, agitation grade and heat transfer ability on polymerization temperature and product quality in the production of carboxylated styrene-butadiene rubber latex in 12.
0m ̄3聚合釜在生产羧基丁苯胶乳中搅拌功率、搅拌级别、桨叶端速和传热能力对聚合温度及产品质量的影响。
6)  carboxylated acrylonitrile-butadiene rubber latex
羧基丁腈胶乳
补充资料:羧基胶乳
分子式:
CAS号:

性质:共聚物中含有羧基(-COOH)的胶乳的总称。工业产品有以下系列:(1)丁二烯-苯乙烯-丙烯酸或甲基丙烯酸;(2)丁二烯-丙烯腈-甲基丙烯酸;(3)丙烯酸乙酯-甲基丙烯酸甲酯-丙烯酸或甲基丙烯酸;(4)苯乙烯-2-乙基己基丙烯酸酯-丙烯酸;(5)乙酸乙烯-2-乙基己基丙烯酸酯-丙烯酸。羧基胶乳改善了胶乳的粘接性、机械稳定性、耐油性和耐老化性,由于羧基胶乳的共聚物分子中引入了羧基,其薄膜拉伸强度得到了显著改善。羧基胶乳冷冻后也比胶乳易于恢复。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条