1) S-EMS
二冷区电磁搅拌
1.
CALCULATION ON VELOCITY FIELD OF LIQUID POOL IN S-EMS OF BILLET CASTER;
小方坯连铸二冷区电磁搅拌处液相穴内的流场计算
2) electromagnetic stirring
电磁搅拌
1.
Flow and Solidification of Copper Thin-slab in Horizontal Continuous Casting with Electromagnetic Stirring;
铜板带水平连铸电磁搅拌中熔体的流动和凝固
2.
Effects of Sr and Electromagnetic Stirring on Microstructure of AZ91D Magnesium Alloy;
Sr与电磁搅拌对AZ91D合金显微组织的影响
3.
Numerical Simulation of Magnetic Field and Flow Field in Aluminum Melt with Electromagnetic Stirring;
铝熔炉电磁搅拌磁场与流场的数值模拟
3) EMS
电磁搅拌
1.
Present Situation of Research and Application of EMS of Semi-solid Forming;
电磁搅拌制备半固态浆料的研究及应用现状
2.
Effect of mould EMS on quality of high carbon steel billet;
电磁搅拌对高碳钢小方坯质量的影响
3.
Development of EMS Technology and its Application in WISCO;
电磁搅拌技术的发展及其在武钢的应用
4) M-EMS
电磁搅拌
1.
Practice on M-EMS in a bloom caster at Xuanhua Steel;
宣钢连铸机结晶器电磁搅拌工艺实践
2.
Application of M-EMS on Billet Caster for Producing Medium and Low Carbon Steel
采用结晶器电磁搅拌技术生产小方坯中低碳钢
3.
The effect of current(150～500A) of mold electromagnetic stirring(M-EMS) technology on metallurgy quality of 280 mm×380 mm,280 mm×325 mm concasting bloom of heavy rail steel U75V etc grade has been tested and studied.
试验研究了电磁搅拌的电流(150～500 A)对重轨钢U75V等钢种(mm)280×380、280×325连铸坯冶金质量的影响。
5) magnetic stirring
电磁搅拌
1.
Numerical simulation of mold electromagnetic stirring for square billet continuous casting;
小方坯连铸结晶器电磁搅拌的数值模拟
2.
The higher the rotating speed is,the stronger the effect of electromagnetic stirring on the liquid is,.
磁场的旋转速率越高,对液态的电磁搅拌作用越强,焊缝金属的晶粒越细小、Al-12Si合金共晶组织越均匀。
3.
The present paper reviews the development of the magnetic stirring technology and its various patterns and their roles, and analyzes the effects of this technology on improvement of the slab quality and foresees the prospect of development of this technology.
综述了电磁搅拌技术的发展、种类及作用 ,举例说明了电磁搅拌技术对改善铸坯质量的影响 ,并展望了电磁搅拌技术的发展前景。
6) Electro-magnetic stirring
电磁搅拌
1.
Simulation of Electro-magnetic Stirring Parameters for Aluminum-tin Alloy;
铝锡合金电磁搅拌工艺参数的模拟分析
2.
The effect of electro-magnetic stirring process parameters on the microstructures of semi-solid AZ91D alloy was studied.
研究了电磁搅拌工艺参数对半固态AZ91D合金组织的影响规律。
补充资料：冷区
分子式：
CAS号：
性质：又称非放射性区(non-radiation region)。指核动力装置的非放射性区。反应堆堆芯释放出的热能由一回路冷却剂输送至蒸汽发生器，将热量传给二回路。蒸汽发生器所产生的蒸汽被送往汽轮机，进行发电。堆芯和一回路均有放射性，称作热区。二回路、汽轮机及其他堆外设备没有放射性，称作冷区。核电站中，一般称核岛部分为热区，常规岛部分为冷区。
CAS号：
性质：又称非放射性区(non-radiation region)。指核动力装置的非放射性区。反应堆堆芯释放出的热能由一回路冷却剂输送至蒸汽发生器，将热量传给二回路。蒸汽发生器所产生的蒸汽被送往汽轮机，进行发电。堆芯和一回路均有放射性，称作热区。二回路、汽轮机及其他堆外设备没有放射性，称作冷区。核电站中，一般称核岛部分为热区，常规岛部分为冷区。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条