说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 扫描式
1)  line-scan
扫描式
1.
Research of a digital X-ray radiography system for chest examinations based on line-scan;
扫描式数字X射线胸部摄影系统的研制
2)  scanning mode
扫描方式
1.
A control method of electron beam scanning track and scanning mode was put forward, in which the curvilinear equations describing the electron beam scanning track were established according to the shape of the actual welding seam, the size of scanning region, scanning mode etc.
提出一种电子束扫描轨迹和扫描方式控制方法 ,采用二维曲线来描述电子束扫描轨迹 ,根据实际焊缝的形状、扫描区域的尺寸、扫描方式等建立曲线方程 ,并对其进行离散化处理 ,然后经D/A转换产生所需的模拟信号 ,该信号经放大后输入给偏转线圈驱动电子束按设定的扫描轨迹和扫描方式运动。
2.
Under the conventional CT scanning mode, some specimens with the flat-type can t fulfill the CT reconfiguration because they are failing to get the complete projection being restricted by the rotated space or detector s dynamic scope.
在常规的CT扫描方式下,对于一些形如扁平体的试件,通常受旋转空间或探测器动态范围的限制而得不到完整的投影,也就不能完成CT重构。
3.
Since 45°rotation scanning mirror is the most mature and common photo-mechanical scanning mode, having the wide range of applications in the satellite remote sensor.
但是由于45°旋转扫描反射镜在扫描过程中会产生像旋,直接采用该扫描方式在应用于线列或面阵探测器并扫成像系统时会造成轴外视场的无法配准。
3)  scanning way
扫描方式
4)  Seguential ICP
扫描式ICP
5)  scan mode
扫描方式
1.
Various scanning mode is built in the system, which offers system-level support for the most common scan mode, a.
霓虹灯动态效果设计是霓虹灯行业的重要组成部分,其关键在于扫描方式的设计。
6)  Scanning mode
扫描模式
1.
Based on the study on the scanning mode of STM,the “Coincidence Scanning Mode”is described in this paper.
在对扫描隧道显微镜模式研究的基础上 ,首次提出“符合扫描”模式 ,不但从理论上消除了原有扫描模式带来的测量误差 ,而且还使测量速度提高了 70 % 。
2.
This paper introduces briefly the recent progress in research of these three aspects at the Computer Tomography Laboratory of Capital Normal University, includimg several new scanning modes and their corresponding reconstruction algorithms, the research of X-ray energy-spectrum, GPU-based analytical reconstruction algorithms and iterative reconstruction algorithms, artifacts formation mech.
具体包括多种新的扫描模式和相应重建算法、X射线能量谱的研究、基于GPU的多种解析重建算法和迭代重建算法的加速实现方法、多种伪影形成机理的研究及有效的伪影校正方法、基于GPU实现的体绘制算法、基于这些研究成果的算法平台和软件研发以及成果推广应用情况等。
3.
The change regularity of emergence angle is analyzed emphatically under scanning mode.
采用扫描模式后海面出射角的变化规律,通过使用MATLAB进行仿真,得到在不同风速情况下,发送端的扫描模式对海面出射角和通信成功率的影响。
补充资料:<二>JSD系列吸吮扫描式自洁式过滤器
一、功能与用途
  JSD系列吸吮扫描式自洁式过滤器适用于过滤悬浮状细微杂质,杂质颗粒一般500-25微米,是一种细过滤装置。 
 

二、设备结构与工作原理 
  JSD系列吸吮扫描式自洁式过滤器采用高强度的Johnson楔形滤网,通过压差控制、定时控制自动清洗滤网。当过滤器内杂质积聚在滤网表面引起进出口压差增大到预定数值时,或定时器达到设定时间时,电动控制箱发出信号,使旋转的吸吮装置开始转动,同时排污阀打开。此时系统泄压排水,在吸嘴与滤网内侧接触部分出现一个相对压力低于滤网外侧水压的负压区,迫使部分净循环水从滤网外侧流入吸嘴内部,吸附在滤网上杂质微粒随水流进入吸嘴内并从排污阀排出。特殊设计的Johnson网使得滤网在吸嘴口产生了喷射效果,任何杂质都将被从光滑的内壁上吸走。整个清洗过程大约只需30-50秒,其间不会断流,清洗耗水量少。 
     
  三、主要技术参数  

进出口通径mm506580100125150200250300350
参考流量m3/h254050100120150220400580800
过滤精度μm≥25
阻力损失MPa0.01-0.02
差压设定范围MPa0.02-0.16
清洗时间设定S0-180
工作温度<100
控制方式 压差、定时
电机参数 380V  50HZ      0.15-1.1KW       IP54
清洗耗水量 主管道平均流量的1%左右
工作压力MPa≤4.0MPa(工作压力大于4.0MPa另行设计)

四、结构形式及外形尺寸 
 
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条