1) Bone remodeling
骨质重塑
2) bone mass
骨质
3) osteoporosis
骨质疏松
1.
Experimental Study of The Effect of OPGmRNA and RANKLmRNA about The method of Bu Shen Jian Pi on The Osteoporosis rat;
补肾健脾法对骨质疏松大鼠OPGmRNA、RANKLmRNA表达影响的实验研究
2.
Effects of Bushenfugai Traditional Chinese Medicine on morphometry of osteoporosis induced by ovary irradiation in rats;
补肾富钙中药对大鼠卵巢辐射损伤所致骨质疏松形态计量学的影响
3.
Progress in the research into the relationshipbetween osteoporosis and jaw implant;
骨质疏松症与颌骨种植体关系研究进展
4) Bone-china
骨质瓷
1.
Application to Bone-china of R_2O-RO-Al_2O_3-B_2O_3-SiO_2 System;
R_2O-RO-Al_2O_3-B_2O_3-SiO_2系统在骨质瓷中的应用
2.
The item is studied on the five-element-system ,which is mainly consisted by K_2O,CaO, Al_2O_3,B_2O_3 and SiO_2, through adding a few kinds of flux oxides, study them flux domino effect and their capability,find out them some change rules and forming-glaze’mechanism of R_2O-RO-Al_2O_3-B_2O_3-SiO_2 system, offer a way of study on bone-china ,which doesn’t contain lead-element.
本实验是以K_2O、CaO、Al_2O_3、B_2O_3、SiO_2为主的五元系统,在此五元系统的基础上,通过引入熔剂性氧化物,对其熔剂效应及性能关系进行了深入研究,找出了R_2O-RO-Al_2O_3-B_2O_3-SiO_2系统的一些变化规律及其成釉机理,为骨质瓷无铅熔块釉的研制提供了重要的理论基础。
5) bone food
骨质食品
6) bone china
骨质瓷
1.
for long time,the traditinal bone china has always used the process of double firing,but it is inefficiency and wastes plenty of energy for the hollow wares.
研制成功了一种适合于骨质瓷一次烧成使用的生料釉,在不降低产品的外观质量与内在性能的情况下,降低了成本,节约了能源,开创了一条骨质瓷生产的新思路。
2.
This paper has worked out a perfect producing processes for bone china decorated under glaze through the analyzing on civil ceramic decorating under glaze and connecting the producing processes and product characteristices of bone china in local ceramics zone.
通过对素胎与花纸颜料中间层的研究及釉料适应性的分析与调试 ,研制出装饰效果高雅 ,铅镉溶出量为零的釉下彩骨质瓷。
3.
Lead free frit glaze for bone china has been made successfully by replacing PbO in lead frit glaze with K 2O,SrO and Li 2O.
选用K2 O、SrO、Li2 O替代PbO研制成功了骨质瓷用无铅熔块釉 ,基本保证了釉面的高光泽度、白度和热稳定性 ,又保证了使用过程中低铅镉溶出。
参考词条
补充资料：挤塑吹塑
分子式：
CAS号：
性质： 由挤出机挤出管状型坯，并将它垂挂在安装于挤出机头正下方的预先打开的模具型腔中。当下垂的型坯达到合格长度后立即合模，靠模具的切口将管坯切断，然后通过从模具分型面上的小孔插入的压缩空气吹管送入压缩空气，使型坯吹胀紧贴模壁而成型，然后脱模即成制品。
CAS号：
性质： 由挤出机挤出管状型坯，并将它垂挂在安装于挤出机头正下方的预先打开的模具型腔中。当下垂的型坯达到合格长度后立即合模，靠模具的切口将管坯切断，然后通过从模具分型面上的小孔插入的压缩空气吹管送入压缩空气，使型坯吹胀紧贴模壁而成型，然后脱模即成制品。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。