1) delivered dose
单次喷射量
1.
Determination of delivered dose uniformity of formoterol fumarate powder for inhalation by HPLC;
HPLC测定富马酸福莫特罗粉吸入剂单次喷射量均匀度
2) ray tracing ray tracing
单次散射参量
3) Intermittent injection
隔次喷射
4) Secondary injection
二次喷射
1.
Based on the PW2000 fuel injection pump,by fuel injection pump performance testing and comparing,the influences of delivery valve s opening pressure,diameter of fuel returning hole and seat angle of returning valve on injection pump pressure,nozzle pressure,residual pressure,injection pattern,secondary injection and cavitations were discussed in this paper.
以PW 2000喷油泵为基础,通过喷油泵性能测试对比研究与分析,研究在高喷射压力强化条件下,等压出油阀偶件回油阀开启压力、回油孔直径、回油阀座面角度对喷油泵泵端压力、嘴端压力、残余压力、喷油规律综合性能及燃油液力系统穴蚀、二次喷射的影响规律与程度。
2.
On the base of the PMS type pump, which is produced by Weifu group company and powerful in in-line pumps, under high injection pressure the influences of three kinds of basic delivery valves on the comprehensive performance, such as pump pressure, nozzle pressure, residual pressure, injection rate, secondary injection and cavitation, are investigated.
以无锡威孚公司目前机械直列喷油泵产品中强化程度较高的PMS喷油泵为基础 ,通过试验研究的方法 ,对比测试与分析等压出油阀、阻尼阀、等容出油阀喷油泵性能数据 ,研究 3种基本出油阀偶件在高喷射压力强化条件下 ,对喷油泵泵端压力、嘴端压力、喷油规律与燃油液力系统穴蚀、二次喷射的影响规律与程度。
5) multiple injections
多次喷射
1.
The results of multiple injections show that, the pilot injection reduced the ignition delay and premixed combustion of the main injection.
多次喷射的研究表明,预喷对燃烧的主要影响是缩短主喷滞燃期、减少主喷预混燃烧。
2.
Multiple injections coupling with EGR is regarded as one of the most important technology of modern diesel engine.
降低有害排放是柴油机研究的关键课题,多次喷射结合EGR被认为是降低柴油机有害排放的重要技术途径。
6) split injection
多次喷射
1.
The combustion process of a heavy duty DI diesel engine with typical split injection was calculated,and simulated parameters were modified through the comparison with experimental results.
对重型直喷式柴油机典型多次喷射方案进行了燃烧过程计算,通过与试验结果对比,对计算过程参数进行了修正。
补充资料：装箱单、重量单、尺码单
装箱单、重量单、尺码单
[装箱单、皿t单、尺码单1装箱单(Pack-ing Ust)是说明货物包装情况的单据，包括包装材料、包装方式，以及详细的包装内容，如花色、规格搭配等。进口地海关主要依据装箱单对某一特定内容的包装内容进行检查，也是进口商核对货物的依据。装箱单的内容有:单据名称、卖方名称、唆头、件数、规格、数量、毛净重、签字等。 重量单(Weight ust)是由卖方或第三者提供的，表明货物重量的单据。一般包括皮、毛、净重。它必须和其他单据上所表示的货物重量一致。 尺码单就不详细介绍了。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条